Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD 0x00000024 related to USB eLiscenser driver?

08 Jun 2012   #1

Windows 7 Home Premium x64
BSOD 0x00000024 related to USB eLiscenser driver?

Hey, I've gotten 2 BSOD 24 errors while having my USB eLiscenser software up within 30 minutes. I'll usually get an error from the Liscener software and then my computer screen will go fuzzy for a second and then a really loud noise comes out of my speakers and the BSOD 24 error pops upe

Here are the memory dumps
Please tell me any other information you might need to help me. This error occurs pretty often if I have the software up but I haven't tested my computer without it.

I just finished reinstalling my operating system today because I thought that might be the solution to this problem but that didn't work. They start occuring again right after I installed the eLiscenser diver again. All my drivers are up to date.

Note: I NEED this software. I use it to open Cubase 6 which is a program used to record music and I cannot go without it. Having it is a MUST!

Thanks for your help.

System Specs:
OS: Windows 7 Home Premium x64
CPU: AMD Phenom II 4x 955 Black Edition
Motherboard: ASUS M4A88T-M
Memory: 8GB DDR3 Ballistix
Graphics Card: XFX ATI Radeon HD 5870

My System SpecsSystem Spec
08 Jun 2012   #2

MS Windows 7 Ultimate SP1 64-bit

My System SpecsSystem Spec
08 Jun 2012   #3

Windows 7 Home Premium x64

Quote   Quote: Originally Posted by karlsnooks View Post
Ah missed that little part, thanks.

Editted my post.
My System SpecsSystem Spec

09 Jun 2012   #4

Windows 7 Home Premium 64 Bit

Security Software: ??? Make sure to install security software. I recommend either of these:
After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Make sure to install all Windows Updates. I see you do not have Service Pack 1 installed:

Your crashes primarily indicate hard disk problems. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption, viruses, or memory problems.
  • If you are overclocking any hardware, please stop.

  • Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors checked for all SSDs. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log (you may need to search for wininit instead of chkdsk).
    For any drives that do not give the message:
    Windows has checked the file system and found no problems
    run disk check again as above. In other words, if it says:
    Windows has made corrections to the file system
    after running the disk check, run the disk check again.

  • Run the short and long tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, uninstall it in device manager and see if the system performs better.

  • Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

  • Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan.

  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
10 Jun 2012   #5

Windows 7 Home Premium x64

I just did the Memory test and got alot of errors in the memory so I just replaced both my RAM sticks for a fast solution to see if it would work. Working good so far, I'll post back if any other problem occur or if I don't have any.
My System SpecsSystem Spec
10 Jun 2012   #6

Windows 7 Home Premium 64 Bit

Alright, good steps. Thanks for updating us. :)

Look forward to finding out the outcome.
My System SpecsSystem Spec
13 Jun 2012   #7

Windows 7 Home Premium x64

It seems I got rid of the BSODs but I started getting lockups 15-20 minutes after bootup so I replaced my motherboard to fix this issue and it seems to be running perfectly again. Will check back in.

Reason for replacing my motherboard instead of CPU or GPU was because I had 2 bad RAM ports in my motherboard and I was having very strange problems with USB ports and what not, So I figured replacing the Motherboard would be the smartest idea.
My System SpecsSystem Spec
13 Jun 2012   #8

Windows 7 Home Premium 64 Bit

Nice troubleshooting!

Let us know if you need anything further or if you determine the problem is indeed solved. :)
My System SpecsSystem Spec
14 Jun 2012   #9

Windows 7 Home Premium x64

Ok I just got a error 0x00000050 BSOD

I have replaced my RAM
Replaced my Motherboard
Reinstalled my operating system.

So it's either hard drive or GPU most likely

And no I don't have any viruses, I have not gone on any suspicious sites or downloaded anything weird or opened any suspicious emails. I do have Malware Bytes on my computer and I do have Service pack 1.

I'm a computer tech myself so please don't give me suggestions to update software. Becuase 5 day old software WILL NOT cause a BSOD. and if it did half the world would have BSODs lol.

I attached the Dump. Thank you!
My System SpecsSystem Spec
15 Jun 2012   #10

Windows 7 Home Premium 64 Bit

Security Software: ??? Make sure to install security software. I recommend either of these:
After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Recommend removing your ASUS utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability.

Update the following driver:
synusb64.sys Fri Jun 26 07:30:11 2009 (4A44CD63)
The above is your SIA Syncsoft USB protection software. If you cannot find an update for it, I would recommend removing it.

Crashes point to memory. We should check your RAM compatibility. Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.
My System SpecsSystem Spec

 BSOD 0x00000024 related to USB eLiscenser driver?

Thread Tools

Similar help and support threads
Thread Forum
BSOD - Most likely GPU driver related
I just installed a Gigabyte G1 970 GPU in my computer, replacing a 6970 GPU. Before installing the new drivers, I uninstalled the ATI drivers via ATI's uninstaller followed by a reboot. After installing the GeForce drivers, I am getting occasional BSOD's when closing games (Half Life 2: Episode 2...
BSOD Help and Support
BSOD Probably related to video driver
Hey guys, So recently I've been getting quite a few BSODs from my 6 month old laptop. For the research I've installed bluescreenview to see what is causing the crashes. Here is the logs for the most recent crash I had (Which is about 20 mins earlier): ...
BSOD Help and Support
BSOD related to Garmin USB driver?
I recently build a new Sandy Bridge computer to replace an older Conroe system. The new build retained the SSD (OS and programs) drive and the SATA data drives along with the existing Win7/64HP installation. I built an Asus P8Z68V Pro with an Intel i5-2500k and DDR3-1333 ram (12GB). I did not...
BSOD Help and Support
BSOD on shutdown, usb driver related
Hi, I recently installed an USB 2.0 PCI card with VIA v6212l chipset to use with an USB Arcade stick for playing games (the stick has faulty drivers and requires via chip to work) It works just fine, until I try to shut down the pc. After removing the card, I stopped getting a BSOD. So...
BSOD Help and Support
BSOD Crashes, driver related?
I've been having problems for a few days now. At first I thought it was driver related as one of my hardware devices was showing up as 'Unknown' but that's been taken care of. I thought I had cured it because I didn't get BSOD for a couple days, but I've gotten it 3 times today. Kernel-power...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:05.
Twitter Facebook Google+