BSOD When playing games - Driver related.

I see, maybe that explains why my 2 512 MB DDR2 RAM died lol.

I will try to revert back to windows XP since vista is a bit ugly,

Thanks for the help people, I will post back when everything is done.

Analysis:

Realtek Audio:

One of your crashes pointed to Realtek Audio; update the drivers for your Realtek HD Audio device from your motherboard support site.

avast!:

The other crash blames avast!. Remove avast! with the avast! Uninstall Utility and replace with either of these:

• Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.
  
  
• Good and Free system security combination.

The replacing avast! is just to test. It may not be the actual problem but is masking the true problem. MSE is less likely to do so.

Hardware:

The Realtek related crash directly implicated hardware as the cause: Run some hardware checks.

• If you are overclocking any hardware, please stop.
  
  
• If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
  
• Run all but the advanced tests with SeaTools for HDDs.
  SeaTools for Windows
  
  SeaTools for DOS
  
  
• Monitor temperatures during the following tests.
  
  Use the following programs to monitor the temperatures.
  • Real Temp is a good CPU temperature monitor.
  • Speccy - System Information - Free Download will monitor all hardware temperatures.
  • HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
  
  
  • Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let it run until the GPU temperatures even out or until the GPU temperatures reach a dangerous level (you can find the max temperature for your card on either the nVidia or AMD sites; if you are not sure, ask us). The goal is to get a steady temperature, find out if the GPU is overheating, or to see if there are any artifacts present in the test itself: look for strange pixelated patterns on the screen or colors that do not look like they belong. Then use the |MG| Video Memory Stress Test 1.7.116 Download to test your graphics card memory. Let the memory test run for at least seven passes; the more the better.
    
    
  • Run Hardware - Stress Test With Prime95 to determine any hardware problems. Run all three tests for a few hours each. If you get errors, stop the test and post back here.
    
    
  • Follow the steps for doing CPU stress test using IntelBurnTest
  
  
• Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).
  
  
     Warning

  Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!
  
  
  For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
  
  1. Shut down and turn off your computer.
  2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
  3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
  4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
  
  Once these steps have been followed, it is safe to remove and replace components within your computer.

Hi Mike (Sorry I looked at your profile lol)

1)I followed your instructions, Reinstalled Realtek HD driver with the CORRECT ONE, same with Avast, I unistalled it folowing your instructions, and installed MSE. After that I installed SeaTools but looks like I cant perform tests idk why.

2) Downloaded and ran FurMark Benchmark for half an hour (99% gpu usage), the max temperature achieved was 74 C (stable) and my GPU max temperature is 105 C so I think its fine.

Last night I could play for hours and hours without problems, until today my PC froze multiple, times and gave me a PAGE_FAULT_IN_NON_PAGED_AREA BSOD (No minidump because my PC froze during the BSOD lol).

3)So today I ran IntelBurninTest and I recieved an error (results), it seems that my CPU is unstable due to temperatures (now it makes sense why it crashes more during the day, it is very hot here in Barranquilla during the day: 28-34 C !! )

I will attach the CPU BURN IN THEST results here, thanks for your time Mike.

Well that will be hard, Im using a Spanish version of XP, and it seems I cant set it to English unless I reinstall windows...Again.

=(