Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - Page Fault In Nonpaged Area

11 Jun 2012   #1
PrimeTime

Windows 7 Ultimate
 
 
BSOD - Page Fault In Nonpaged Area

Hi all,

I've recently run into the dreaded BSOD - Page Fault in Non-Paged Area screen. Initially, it started randomly while I was copying some files over but now has escalated into always occurring every time when I start up.

Basically, windows will start up and get past the welcome screen so I can see my desktop. After a few seconds though, the BSOD will show up with the error code of: 0x00000050 (FFFFF8A00A966000, 0000000000000000, FFFFF80003597079, 0000000000000000)

I was wondering if anyone would assist in diagnosing what the issue may be and how to fix it. I have attached the dump files in this post and the specs of my machine is:

I5-750
4GB RAM
HD 6850 2GB
4 HDDS (120GB SSD, 1TB, 750GB, 500GB)
Windows 7 Ultimate

Edit: I've also performed memory tests but they do not show that anything is an issue there.

Edit 2.0: This is what shows up on safe mode.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 3081

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8A004B66000
BCP2: 0000000000000000
BCP3: FFFFF80003F98079
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1


My System SpecsSystem Spec
.
11 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

What memory tests have you run? How many passes did you run them for?


Since you did not find any hardware related problems, I suspect the following:
Code:
Start Menu\Programs\DAEMON Tools Lite	Public:Start Menu\Programs\DAEMON Tools Lite	Public
Start Menu\Programs\GIGABYTE\ET6	Public:Start Menu\Programs\GIGABYTE\ET6	Public
Start Menu\Programs\Utilities\EasyCleaner	RAWRZ\Julz:Start Menu\Programs\Utilities\EasyCleaner	RAWRZ\Julz
Start Menu\Programs\Video\MSI Afterburner	RAWRZ\Julz:Start Menu\Programs\Video\MSI Afterburner	RAWRZ\Julz
  • DaemonTools comes with a driver sptd.sys that is known to cause crashes.

  • EasyTune6 provides interfaces to the hardware for software based overclocking. Those interfaces can cause instability since software overclocking does not provide voltage changes necessary for overclocking to be stable.

  • 3rd party Windows 7 optimization software is not required for Windows 7. Windows 7 is already light weight, so stripping it down further by cleaning the registry and removing Windows features damages the OS beyond repair so that a Clean Reinstall - Factory OEM Windows 7 is needed. This is the most likely scenario you are facing.

  • MSI Afterburner causes instability for the same reason as EasyTune6.
My System SpecsSystem Spec
12 Jun 2012   #3
PrimeTime

Windows 7 Ultimate
 
 

Ok. I've only just read your post now.

It appears the problem has been resolved simply by installing Windows SP1.

Though I suspect the installation of Windows SP1 perhaps may have overwritten some corrupted system file? Its difficult to tell... but my pc works 100% fine now.
My System SpecsSystem Spec
.

12 Jun 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

Quite possible a corrupted Windows file was fixed by the installation of SP1. Could also have been one of the updates that provides more stability.

Either way, I am glad to see it solved!
My System SpecsSystem Spec
12 Jun 2012   #5
PrimeTime

Windows 7 Ultimate
 
 

I'm also quite glad to see it solved :)

What was also strange was that I searched in the forums and found a thread dealing with similar symptoms to my own and the actions prior were also the same. In this case, it was installing max payne 3... again the similarity with the resolution to the issue including the installation of SP1.
My System SpecsSystem Spec
12 Jun 2012   #6
writhziden

Windows 7 Home Premium 64 Bit
 
 

I'll keep that in mind with people having similar problems with Max Payne 3. Thank you for the info.
My System SpecsSystem Spec
Reply

 BSOD - Page Fault In Nonpaged Area




Thread Tools




Similar help and support threads
Thread Forum
BSOD Page fault in nonpaged area
Hello, I replaced my old HDD for an SSD. After turning on AHCI-mode in the BIOS and formatting the new SSD, I installed Windows 7 Ultimate x64 SP1. Now that Windows installation is complete, I installed all the drivers for my hardware. Since then, after starting Windows a BSOD appears with the...
BSOD Help and Support
BSOD: page fault in nonpaged area
Hello, I bought a new computera last week and it has been throwing BSODs at random times, around 2-3 times a week, with no apparent reason. The error I get is PAGE_FAULT_IN_NONPAGED_AREA, win32k.sys. I'm uploading the diagnostics I got from the SD diagnostic tool. Please, I'm desperate, I...
BSOD Help and Support
BSOD - Page fault in nonpaged area
Just done a clean install of windows to solve an issue I had with graphics drivers crashing then recovering this doesnt seem to have helped as screen has frozen and NOT recovered twice now and just had this BSOD:Page fault in nonpaged area. Wasnt fast enough to catch codes on screen but SF...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area
Hi All, First post here so hope I have done all correctly! Had hoped to catch up on my workload today but windows decided otherwise! Have had multiple BSOD. Mainly Page Fault in Nonpaged Area but also others such as Apc Index Mistmatch. I am getting BSOD on every boot. I literally cannot use...
BSOD Help and Support
BSOD - page fault in nonpaged area - pls pls help
I have just built my dream custom PC Windows 7 x64 Ultimate Ga-x58a-ud3r MB and 6GB corsair ram Gtx 460 SLI SSD (ocz sata 2) (boot) none raid SSD (crucial sata 3) Samsung F3 1TB (storage) 850w Corsair PSU.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:05.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App