Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with BSOD please don't know problem.

14 Jun 2012   #1
zack317

windows 7 ultimate 64bit
 
 
Help with BSOD please don't know problem.

Here's my minidump files and etc.

My computer will run perfectly fine, and then suddenly, not when running any specific application, starts to freeze up and then BSOD. No idea what's causing it and I would appreciate any help.


My System SpecsSystem Spec
.
15 Jun 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

You have a wide variety of crashes. That usually indicates a hardware issue. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!


    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec
Reply

 Help with BSOD please don't know problem.




Thread Tools




Similar help and support threads
Thread Forum
Problem with BSOD arising randomly. Problem more frequent. NTSF.SYS
Having an issue with a computer going into BSOD with no warning. The computer's information is attached. There really isn't any more information to give. It started relatively recently. Nothing different was downloaded to the computer. AVAST is not installed. Not utilizing Daemon tools. Any...
BSOD Help and Support
BSOD Problem
Hello Guys, I recently build a computer and it is working good but, when my pc goes on sleep mode, the pc shutsdown (BSOD). This only happens when the pc goes on sleep mode. I have downloaded the SF Diagnostic Tool and here are the results, please someone help me. Please see the attachment...
BSOD Help and Support
BSOD Problem
My graphics card crashed and the screen went all weird looking, then my computer restarted. This is the 2nd time today that's happened. It never happened before today. I have Windows 7 Ultimate 64-bit. Also, I use SUPERAntiSpyware. I'm also on Bootcamp on a 15" early 2011 Macbook Pro. Problem...
BSOD Help and Support
Yet Another BSOD problem.
Hello I get a lot of random BSOD nowadays on my 3 year old laptop. Usually I can pinpoint the BSODs myself, but this time it's beyond my comprehension. Tried several reformats, all drivers update (at least when I last reformatted), different versions of Win 7, also both x86 and x64. BIOS is...
BSOD Help and Support
BSOD Problem :S
Hi, and yes I have BSOD problem as well :) Random ones, system can be stable for couple of days, then it can BSOD 5 times in an hour...there is no rule. I loaded win7 in safe mode no problems there, so i assumed it is some driver problem, also my pc runs perfectly on Vista-64, no crushes. Drivers...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App