Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: STOP error 7f random occurance

22 Jun 2012   #1

Windows 7 Ultimate 32 bit
STOP error 7f random occurance

We have several systems running that are very intermittently (somewhere around every 48 hours of runtime) having the exact same stop error. Analysis of the memory dumps reveals the following Bugcheck. This is consistent across multiple machines.

Can anyone confirm my reading of this as a conflict between Hasplms.exe and Morphis.sys
HaspLMS is a license manager for USB security keys
Morphis.sys is the drivers for the Matrox Morphis video board.

The systems run Windows 7 ultimate 32 bit, 2 Gb Ram
Motherboard is MB800V which uses Intel chipset 845GV
Pentium 4 Cpu

Any advice?

* *
* Bugcheck Analysis *
* *
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
kb will then show the corrected stack.
Arg2: 801c6000
Arg3: 00000000
Arg4: 00000000
Debugging Details:
TSS: 00000028 -- (.tss 0x28)
eax=9a08a38c ebx=0000000a ecx=00000000 edx=9a08a3e8 esi=8593b9a0 edi=9a08a3e8
eip=8f550836 esp=9a089fbc ebp=864c2e10 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
8f550836 53 push ebx
Resetting default scope
PROCESS_NAME: hasplms.exe
LAST_CONTROL_TRANSFER: from 00000000 to 8f550836
864c2e10 00000000 868846dc 00000000 8f5371a4 Morphis+0x1a836
STACK_COMMAND: .tss 0x28 ; kb
8f550836 53 push ebx
SYMBOL_NAME: Morphis+1a836
IMAGE_NAME: Morphis.sys
FAILURE_BUCKET_ID: 0x7f_8_Morphis+1a836
BUCKET_ID: 0x7f_8_Morphis+1a836
Followup: MachineOwner

My System SpecsSystem Spec
24 Jun 2012   #2
Microsoft MVP


The dump blames a driver named Morphis.sys
It seems to belong to a Matrox device (?video?)

Beyond that we'll need this info to analyze it further:
My System SpecsSystem Spec
26 Jun 2012   #3

Windows 7 Ultimate 32 bit

Great, thank you, I've attached the zip file for our latest crash.
My System SpecsSystem Spec

26 Jun 2012   #4
Microsoft MVP


There are no memory dumps in the uploaded files, so my assistance will be limited. Please see if you can locate the missing memory dump files:
Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2
You only have 4 updates since SP1 - most systems have from 75 to 130. Please visit Windows Update and get all available Windows Updates.

Your Intel Multimedia Audio Controller doesn't have any drivers installed. Please visit the manufacturer's website to download/install these drivers.

You have both Microsoft Security Essentials and AdAware Antivirus installed. Please uninstall one of them. Then update the other and perform a full system scan (in case they let any virus' slip by).
My System SpecsSystem Spec
26 Jun 2012   #5

Windows 7 Ultimate 32 bit

Ok, thank you.
I've uploaded to the following site.
My System SpecsSystem Spec
27 Jun 2012   #6
Microsoft MVP


Genport.SYS Mon Apr 20 13:38:47 1998 (353B8827)
MapMem.SYS Thu Jan 09 09:26:08 1997 (32D50000)
These drivers date from the 1990's and aren't compatible with Win7. They were manufactured by 3dfx Interactive and may also be associated with the Matrox Morphis software.

Remove them from your system immediately.
If they are still needed, you must obtain Wni7 compatible drivers to install.

Intel PRO/100 Adapter NDIS 5.1 driver dates from 2007 and must be updated from the Intel Download Center ( ) It's most likely this link (but the adapter is very old, so there may continue to be problems):

The Rainbow Tech/SafeNet USB Security Device drivers date from 2008 and must be replaced with Win7 compatible versions also. If you're unable to obtain them, please uninstall the software and remove the device from your system.

Morphis.sys dates from 2009 and is a part of the driver package for your Matrox video. Please update this to the latest Win7 compatible version. If none is available, please uninstall it and use the default Windows drivers.

If the above steps don't stop the BSOD's, please zip up and upload any new memory dumps with your next post - and we'll see what we can figure out from there.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at:
- Info on how to troubleshoot BSOD's (DRAFT):
- How I do it:


Morphis.sys   Mon Dec 21 00:38:43 2009 (4B2F09E3)
SENTINEL.SYS  Mon Jun 02 02:13:52 2008 (48438FA0)
Genport.SYS   Mon Apr 20 13:38:47 1998 (353B8827)
MapMem.SYS    Thu Jan 09 09:26:08 1997 (32D50000)
aksfridge.sys Tue Oct 04 00:51:16 2011 (4E8A90C4)
amdxata.sys   Fri Mar 19 12:19:01 2010 (4BA3A3F5)
e100b325.sys  Fri Nov 16 13:53:32 2007 (473DE72C)
hardlock.sys  Tue Aug 09 05:03:43 2011 (4E40F7EF)
mtxmem.sys    Wed Jun 02 20:51:48 2010 (4C06FCA4)
mtxserv.sys   Wed Jun 02 20:52:05 2010 (4C06FCB5)



Loading Dump File [C:\Users\John\_jcgriff2_\dbug\__Kernel__\MEMORY.DMP]
Built by: 7601.17790.x86fre.win7sp1_gdr.120305-1505
Debug session time: Tue Jun 26 09:25:29.859 2012 (UTC - 4:00)
System Uptime: 0 days 0:02:40.312
BugCheck 7F, {8, 801c6000, 0, 0}
*** ERROR: Module load completed but symbols could not be loaded for Morphis.sys
Probably caused by : Morphis.sys ( Morphis+1a836 )
PROCESS_NAME:  sppsvc.exe
FAILURE_BUCKET_ID:  0x7f_8_Morphis+1a836
Bugcheck code 0000007F
Arguments 00000008 801c6000 00000000 00000000
BiosVersion = 6.00 PG
BiosReleaseDate = 01/17/2005
SystemManufacturer =  
SystemProductName =  
CPUID:        "Intel(R) Pentium(R) 4 CPU 2.80GHz"
MaxSpeed:     2800
CurrentSpeed: 2800

My System SpecsSystem Spec
27 Jun 2012   #7

Windows 7 Ultimate 32 bit

Thank you very much!
Your help is really appreciated. I'll try the above and see if the problem resolves.

Best Regards,
Jeffrey Martin
My System SpecsSystem Spec

 STOP error 7f random occurance

Thread Tools

Similar help and support threads
Thread Forum
BSOD occurance at random intervals. Here's some logs.
Hi there, for the past 2 months my Computer has been hanging for a few brief seconds before the BSOD happens. But the funny thing is, I don't see a blue screen, just a black screen; which means I can't see what error it is. However once my computer restarts and loads, I get a pop saying that...
BSOD Help and Support
BSOD Random Occurance (atikmpag.sys possible)
Hello, BSOD has happened three times. Once, I was watching a movie and the other times when I was away from the computer. At the times I was away from the computer, no video or audio was running, some other programs were running and that was all. This problem occurred before and all I had to...
BSOD Help and Support
BSOD - random occurance
Hello, I have been experiencing BSOD events at random times and can't seem to identify any common cause between them. a couple days later activated driver verifier and the system went into a endless BSOD/reboot sequence. I have attached the requested files, please advise on what I should do...
BSOD Help and Support
BSOD - random occurance - 0x000000F4, atapi.sys, ntfs.sys
Hello, i've got random BSOD occuring ever since i changed my video card from an ASUS EN9600GT to a GTX550Ti Intel Core i5 760 @ 2.81ghz ASUS P7H55M/CSM 4(2x2)GB Kingston DDR3-1333 Seagate Barracuda SATAII 160GB 7200RPM Thermaltake Toughpower 750W ASUS GTX550Ti 1GB LG 16x supermulti DVD...
BSOD Help and Support
BSOD - Random Occurance
BSOD might happen twice in one day or might not happen for a week. I don't seem to be doing the same thing twice when it happens. Tried to run the perfmon /report but I keep getting a timeout error. Here is additional info: BC Code: d1 BCP1: FFFFFA8008E6400A BCP2: 0000000000000002 BCP3:...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 17:53.
Twitter Facebook Google+