Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - New PC Build

22 Jun 2012   #1
lokideviluk

64 Windows 7 pro
 
 
BSOD - New PC Build

Hi all,

Appreciate the level of detail you go in providing the tool to take all the relevant info and the support you give back, Many thanks.

So I had a Dell XPS 700 which died and therein i learnt it wasn't really upgradable so went to NovaTech and purchased the necessary components to create a New PC

PC -

CoolerMaster 690 Case
Intel I5 3450
Gigabyte GA-277X-UD3H Motherboard
Ballistix Sport 8GB (2X 4GB)
Sapphire HD 7850
64gig SSD Drive (I can't remember the make off the top of my head)

This is all 6 weeks old,

This is the third Motherboard I've had in as many weeks with the current being about 2 weeks old, the other two died completely zero power etc after a few hours of being on and BSOD all the way through the Windows Install.

Speaking of..

- x86 (32-bit) or x64 - 64bit
- the original installed OS on the system - Its a Retail copy of Windows 7 Pro
- an OEM or full retail version? Full Retail
- What is the age of system (hardware)? - 4 Weeks
- What is the age of OS installation - 2 weeks'ish

Currently its BSOD randomly however significantly less than the previous two motherboards and I can play games (Syndicate for example) for hours without it worrying.

I did have it running on 3x 22" 1080p Monitors however that just increased the instability so returned to a single 28"

I did want to do Graphic design/3D editing however I'm honestly concerned about the loss of data with it so prone to fail,

Please see attached and I'd really appreciate if anyone could shed some light, NovaTech as much as I rate them have no idea.

Kind Regards



My System SpecsSystem Spec
.
22 Jun 2012   #2
lokideviluk

64 Windows 7 pro
 
 

Having read through a number of other BSOD threads its all pointing towards potentially being the SSD, so will go and pick up a SATA HD this weekend for testing whilst you guys review the above.

Many thanks.
My System SpecsSystem Spec
24 Jun 2012   #3
writhziden

Windows 7 Home Premium 64 Bit
 
 

Problematic Software:
Code:
Start Menu\Programs\GIGABYTE	Public:Start Menu\Programs\GIGABYTE	Public
Start Menu\Programs\GIGABYTE\AutoGreen	Public:Start Menu\Programs\GIGABYTE\AutoGreen	Public
Start Menu\Programs\GIGABYTE\ET6	Public:Start Menu\Programs\GIGABYTE\ET6	Public
Start Menu\Programs\MSI Afterburner	Loki-PC\Loki:Start Menu\Programs\MSI Afterburner	Loki-PC\Loki
  • Recommend removing your Gigabyte utilities through Start Menu -> Control Panel -> Uninstall a program. They can provide software interfaces with the hardware for overclocking, and even when the overclock is not enabled, that interface can cause instability.

  • MSI Afterburner/RivaTuner is known to cause instability with systems. Please remove the software.


Install your remaining Windows updates. You have not installed any updates to this point.


Crashes are various and may be due to the above. Take care of those first. Also, the latest .dmp file was from a month ago. Have you had crashes recently?


For the SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
My System SpecsSystem Spec
.

Reply

 BSOD - New PC Build




Thread Tools




Similar help and support threads
Thread Forum
BSOD After New System Build, Many Different Types of BSOD Errors.
I had been getting BSODs on an older custom PC so I decided it was time to upgrade and I recently put together a new system and have been having irregular BSOD errors since day 1. I initially thought that it was the RAM because that was the only other part besides the hard drives that was recycled...
BSOD Help and Support
New build and a BSOD
Just built this system. I get numerous BSOD errors, the one that annoys me the most is 0x00000001E and 0x0000003B. Other less frequent BSODs include: 0x000000A 0x000000FE 0x0000004E 0x00000019 All my pc specs should be in my profile.
BSOD Help and Support
Can I install Icon Packs designed for Build 7600 on to Build 7601?
Can I install Icon Packs designed for Build 7600 to Build 7601? An Icon Pack was saying install on to 7600 only and after I checked my regedit, I learned that I have 7601 (Probably SP1, I don't know). Would I have any problems if I install the icon pack? Thanks.
Customization
BSOD on new build
Hello all, I am fairly experienced at building computers, but after building this latest one, have been having unending difficulties with it. I keep getting a memory dump blue screen of death. I've noticed that it *seems* to only happen when I'm surfing the web, whether it be Chrome or...
BSOD Help and Support
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details
Windows 7 Build 7012 Screenshots Emerged & Build 7013 Details http://www.blogsdna.com/wp-content/uploads/2008/12/windows-7-logo.jpg We all are waiting for Windows 7 Beta 1 build 7000 to get release but it seems some one out their already have access to Windows 7 Build 7012. Here is...
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App