New
#41
Yeah, but after I started it again, I didn't get any errors
Memtest86+ diagnostics are not an exact science. If you get even one error, that is one too many and you should test the modules individually.
Further reading: Fincky RAM
James, I let the test running with both sticks overnight, I've got one error in the Pass 6, and now I went to school and the test was running with only one stick. It went to Pass 12 without any errors. How many passes should I let it run?
Ok, but how many passes do I let it run?
12 passes should be plenty. The point of doing this is to isolate the bad RAM. The first stick went 12 rounds error free. If the second stick goes 12 without errors, you will need to test them longer.
What if they are working just fine? May it be a Hard Disk problem?
Oh, and I've got a 500gb HD. I will install Windows in this HD and see if it works fine. But anyway, I m going to test the another stick overnight again (it takes about 3 hours, so...)
Thanks everybody for the support. I will post here if I have any other problems. About the Windows Update issues... It seems they are gone.