Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random 2 now 3 BSOD,error: 0x000000c2, 0x00000018 and today 0x00000024

25 Jun 2012   #1

Windows 7 Profesional 64bit
Random 2 now 3 BSOD,error: 0x000000c2, 0x00000018 and today 0x00000024


I have random BSOD:

BAD_POOL_CALLER caused by fltmgr.sys
REFERENCE_BY_POINTER caused by ntoskrnl.exe
NTFS_FILE_SYSTEM caused by Ntfs.sys

when I play or browse the web or the system is idle, after reinstalling the system (2-3 weeks ago) and update the BIOS, BSOD did not disappear (but probably do not occur as often).

I checked the RAM and hard drive and everything looks like ok.

The newest addition to the BSOD (BAD_POOL_CALLER, REFERENCE_BY_POINTER, NTFS_FILE_SYSTEM) appears white or black screen, the system pauses and I can not get to do anything except restart the laptop with a button.

Is Windows 7 . . .
- x86 (32-bit) or x64 ?
- the original installed OS on the system?
- an OEM or full retail version?
- What is the age of system (hardware)?
-6 months
- What is the age of OS installation
(have you re-installed the OS?) - Re-installed (2-3 weeks ago)

My System SpecsSystem Spec
25 Jun 2012   #2

Windows 7 Home Premium 64 Bit

Please stop using any MSI overclocking tools and uninstall them from the system. Software overclocking does not provide the necessary settings for a stable overclock.

Your variety of BugCheck codes in your crashes point primarily to hardware. Run some hardware checks.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    warning   Warning
    Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.
My System SpecsSystem Spec

 Random 2 now 3 BSOD,error: 0x000000c2, 0x00000018 and today 0x00000024

Thread Tools

Similar help and support threads
Thread Forum
Random BSOD, x5 today; various error codes
I've been getting BSOD on my desktop for the last month. Sometimes it goes a few days without crashing, sometimes (like today) I get five in a day. Tried getting help on the microsoft forums last week (suggestion was virus scan with Malwarebytes; found one virus, but follow-up scans were clean),...
BSOD Help and Support
Random BSOD 0x00000018
I've been getting these random BSOD for a while now and I can't see any rhyme or reason to them. Its happened when watching videos offline on my hard drive with the wireless off, streaming online stuff, programming, gaming, and even when on a fresh reboot with nothing loaded yet. I'm getting...
BSOD Help and Support
BSOD 0x0000000a, 0x000000c2, 0x00000019 and the most common 0x00000024
Hello, I have these BSODs that occur frequently, at least once a week, usually more. The computer I use is a bit old, but it has functioned well until these BSODs started to appear. I have changed the HDDs, first added the SSD, and the computer was fine for weeks with it, then replaced all...
BSOD Help and Support
Random BSOD error 0x0000003b and 0x00000024
Greetings, I am new to the forum. Recently i have installed windows 7 ultimate sp1 and since then have been experiencing random BSOD ( cant give u a precise number but more than 10+ in 6 days time ). I would have uploaded the dmp files from every bsod i enountered so far but i only recently set...
BSOD Help and Support
BSOD random and error saying "The bugcheck was: 0x00000024"
all drivers updated memtest - no errors hdd test - no errors but still getting this error and blue screen: Event: Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 2012-09-18T18:17:14.000
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:22.
Twitter Facebook