Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD semi-randomly. Self built computer. (BSOD included)

30 Jun 2012   #1

Windows 7 Home Premium x64
BSOD semi-randomly. Self built computer. (BSOD included)

  • 64 bit, full retail.
  • Hardware is 1 month old (built myself)
  • OS was installed when I built it from a USB drive (did not include an optical drive in the build)
  • SPECS:
    1. i5 2500k
    2. ATI 7850 GPU
    3. corsair tx650 PSU
    4. ASRock Extreme3 Gen3 motherboard
    5. Corsair vengance 1600 ddr3 ram (2x4gb)
    6. Coolermaster hyper 212 cooling unit
    7. 500gb Western Digital HD
    8. 64gb Crucial M4 ssd (OS is installed on this drive)

It was working fine the first 3 weeks I had the build, then I went on a vacation for a week. I come back, and the thing BSODs on me 6 times in an hour and a half.

First thing I tried was setting clocks back to normal (was at 4.3ghz on the i5, went back down to 3.3ghz) and it was stable for like 45 minutes after I did that, but it then crashed again. Also did a memory diagnostic test and everything was supposedly good.

My max temps with prime95 now are like 37 degrees celsius with RealTemp because I have the coolermaster hyper 212 as opposed to the stock cooler, so it shouldnt be crashing due to over heating.

Also: first crash occured firing up minecraft.

Thanks for any and all help guys.

My System SpecsSystem Spec
01 Jul 2012   #2

Windows 10 Pro x64, Arch Linux

Also did a memory diagnostic test and everything was supposedly good.
Using which tool/software? You should run Memtes86+ for at least 7 Passes (Test each RAM stick individually)
RAM - Test with Memtest86+

Your BSODs are RAM/Memory related, rest your RAM settings to their default values in your BIOS. Stop any overclocking if any.

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.
Note that this test may overheat the CPU, ensure proper cooling.

Post back with your results.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

    See the comment for FAT_FILE_SYSTEM (0x23)
Arg1: 0000000000050853
Arg2: fffff88018cbc7a8
Arg3: fffff88018cbc000
Arg4: fffff80001ede67c

Debugging Details:

EXCEPTION_RECORD:  fffff88018cbc7a8 -- (.exr 0xfffff88018cbc7a8)
ExceptionAddress: fffff80001ede67c (nt!CcLazyWriteScan+0x0000000000000188)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

CONTEXT:  fffff88018cbc000 -- (.cxr 0xfffff88018cbc000)
rax=0000000000240000 rbx=0000000000000000 rcx=fffff80002097940
rdx=0000000000000000 rsi=ffff6a8009de4390 rdi=0000000000000000
rip=fffff80001ede67c rsp=fffff88018cbc9e0 rbp=fffff80002036280
 r8=fffff88001e5e840  r9=0000000000000000 r10=fffffa800790be30
r11=0000000000000002 r12=0000000000000001 r13=0000000000000000
r14=fffffa8009e313b0 r15=ffff6a8009de4418
iopl=0         nv up ei ng nz na pe nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
fffff800`01ede67c 488b4e60        mov     rcx,qword ptr [rsi+60h] ds:002b:ffff6a80`09de43f0=????????????????
Resetting default scope





ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  ffffffffffffffff

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800020c8100

fffff800`01ede67c 488b4e60        mov     rcx,qword ptr [rsi+60h]

fffff800`01ede67c 488b4e60        mov     rcx,qword ptr [rsi+60h]


LAST_CONTROL_TRANSFER:  from fffff80001ede189 to fffff80001ede67c

fffff880`18cbc9e0 fffff800`01ede189 : fffff880`000000c5 fffffa80`00000000 00000000`00000000 ffff6a80`09de4390 : nt!CcLazyWriteScan+0x188
fffff880`18cbcac0 fffff800`01ea2841 : fffffa80`07909570 fffff800`0218b601 fffff800`020978c0 00000000`00000002 : nt!CcWorkerThread+0x1f9
fffff880`18cbcb70 fffff800`0212fe6a : 00000000`00000000 fffffa80`09813b50 00000000`00000080 fffffa80`078ea040 : nt!ExpWorkerThread+0x111
fffff880`18cbcc00 fffff800`01e89ec6 : fffff880`01ed0180 fffffa80`09813b50 fffffa80`078f9b50 00000000`00000202 : nt!PspSystemThreadStartup+0x5a
fffff880`18cbcc40 00000000`00000000 : fffff880`18cbd000 fffff880`18cb7000 fffff880`18cbc8a0 00000000`00000000 : nt!KxStartSystemThread+0x16


SYMBOL_NAME:  nt!CcLazyWriteScan+188

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


STACK_COMMAND:  .cxr 0xfffff88018cbc000 ; kb

FAILURE_BUCKET_ID:  X64_0x34_nt!CcLazyWriteScan+188

BUCKET_ID:  X64_0x34_nt!CcLazyWriteScan+188

Followup: MachineOwner
My System SpecsSystem Spec

 BSOD semi-randomly. Self built computer. (BSOD included)

Thread Tools

Similar help and support threads
Thread Forum
BSOD custom built computer not shure what to due, randomly happens.
Just built this computer and had no problem and out of no where after a couple weeks i started getting bsod ive done "sfc /scannow" no discrepancy ive scanned multiple things including the harddrive, virus scan and entire computer with nothing coming up i included sf debug files as i do not know...
BSOD Help and Support
BSOD dump included
can someone tell me why?
BSOD Help and Support
BSOD When just used computer Memory dump file included
Well i cand do anything in my CP i get BSOD like 1-2per a day 6h use. it started like one random BSOD and nothing for week then it started come more 1per week -> 2per week -> 3per week -> Jne. I have tryed Registery cleaner and some little thinks like Microsoft memory check, Hard disk...
BSOD Help and Support
BSOD semi-randomly in Sony Vegas 9.0 and 11.0, error 0x0000007A
Howdy, I've been using Sony Vegas for a couple years now, and for about 9 months on my new computer here without any issues. Recently, when I've been trying to open a specific video project, the whole system becomes stuck like it's running out of memory trying to run it all. It's not a big video...
BSOD Help and Support
BSOD (DUMP file included)
thx :)
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:16.
Twitter Facebook Google+