Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after sending for repair

04 Jul 2012   #1

window 7 64
BSOD after sending for repair


Due to repetitive startup problem, i'd send the comp for repair and they change the motherboard for me but BSOD occurred when surfing net, use microsoft office and playing game (warcraft). I resend again and they say it may due to OS which they advise to reformat. After reformatting, BSOD still occurred when i surfing the net and got the following message. What should i do now? Please help

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 17417

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000030
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF880055CA15F
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:

Read our privacy statement online:

If the online privacy statement is not available, please read our privacy statement offline:

My System SpecsSystem Spec
04 Jul 2012   #2

Windows 7 Professional x64


I think you're in luck here - the solution appears to be quite simple. Update your wireless adapter drivers and see if that doesn't solve the problem:

NETw1v64.sys     Mon Jul 20 18:33:35 2009 (4A64F0BF)
...Summary of the dumps:

Built by: 7600.17017.amd64fre.win7_gdr.120503-2030
Debug session time: Wed Jul  4 21:39:38.992 2012 (UTC - 4:00)
System Uptime: 0 days 0:11:17.021
*** WARNING: Unable to verify timestamp for NETw1v64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw1v64.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : NETw1v64.sys ( NETw1v64+1c915f )
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_0xD1_NETw1v64+1c915f
BiosReleaseDate = 01/18/2010
SystemProductName = Aspire 4736     
My System SpecsSystem Spec
04 Jul 2012   #3

window 7 64


There is 2 option:
DRIVERS ONLY: Wireless_15.1.1_Ds64.exe
Intel PROSet/Wireless WiFi Software (includes Drivers): Wireless_15.1.1_s64.exe

So basically i just need to download and apply the second option? Thanks a lot
My System SpecsSystem Spec

04 Jul 2012   #4

Windows 7 Professional x64

I'd personally go for the first option (drivers only), but if you already use the PROSet program, the second option isn't a bad one either. Either way it should solve the problem.
My System SpecsSystem Spec
04 Jul 2012   #5

window 7 64


Ok, thank you for your opinion and help. Greatly appreciated
My System SpecsSystem Spec

 BSOD after sending for repair

Thread Tools

Similar help and support threads
Thread Forum
Sending a hard drive for repair
My laptop hard drive has failed and I need to send it for repair/troubleshooting. However, my hard drive contains "private" photos and videos thus I'm afraid that the repairman may come across these files and may do something bad with them. My question is will it be secure to send the hard...
Hardware & Devices
Best Backup Strategy...before sending laptop for repair?
Dear All, This is a question with aspects that pertain to multiple areas. But as the idea is to place queries in the best possible thread categories, I'll try to tie it all into the subject of backup and restore. Here we go! ;) 1. I own an HP Pavillion dv4. as with my two previous HP/Compaq...
Backup and Restore
computer keeps rebooting, sending to startup repair endless times..
I have a computer given to me by a friend. It has windows 7 installed on it, with 1Ghz, 512 Ram, 120 GB Hard drive( not tech savvy).. anyways, I left it running at night, and when I got up in the morning, it was doing " startup repair". Now, it keeps on going to startup repair after being turned...
General Discussion
Delete everything on HD before sending in for repair?
Hey there. My hard drive has failed me for the second time. First with a currupt partition and now with a corrupt MBR. Since I recently bought it, It is still in the manufacturer's warranty. Before I send it to them, should I run a command prompt (through Windows 7 disc) and do a clean all? I'm...
Hardware & Devices
Need lock-down guide - sending laptop to repair
Hi Folks I need a guide on how to lock-down the guest account so that the repair shop doesn't have access to most of it's contents. System setup: Dual Boot Vista Home Premium / Win7 Pro (actually tripple-boot with WINE) Partitioning according attached image.
System Security

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 22:29.
Twitter Facebook Google+