Hi, sorry for the late reply... I've tryed a clean install it didn't work still got bsod so I turned the computer in for troubleshoot the hardware, didn't want to jeopardise the warranties... but I will keep this thread updated until problem is solved, though now I have to wait 10-15 work days for the troubleshoot.
I sent the computer to the technician to check what hardware failure it was...Failure to Boot:
Even though you are not having a failure to boot, the steps for Troubleshooting Windows 7 Failure to Boot may be helpful.Hardware Stripdown:
I have a feeling your problems are the result of a damaged Windows install, but you could still see if there is a failed hardware component.
WarningBefore you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer.WARNING: The steps that follow can void your warranty!!!
Strip down your system to run only the bare essentials: one RAM module, the CPU, motherboard, one hard disk, one graphics card (or use onboard graphics if you have it), keyboard, mouse, and one monitor. See how the system behaves by running Windows for twice as long as it typically takes for you to get a crash. If it is stable, add one piece of hardware back at a time until you get crashes again. Take notes of what hardware you add and how the system responds to the hardware changes.
As you add and remove hardware, follow these steps for ESD safety:Once these steps have been followed, it is safe to remove and replace components within your computer.
- Shut down and turn off your computer.
- Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
- Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
- Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
first he thought it was the motherboard and after few days called me again and said its the SSD too. Few days later called me again said it wasnt the motherboard it was the graphic card and the ssd, then again after few days called me and said it is SSD, Graphic card and processor. And that was the final result, theyve also runned stress test for about 3 hours and no failure.
Gonna check all this my self as soon as ive done a clean installation.
Reason why they had failed is still unknown.
Quote