BSOD after leaving computer idle after some time


  1. Posts : 6
    Windows 7 Professional 64-bit SP1
       #1

    BSOD after leaving computer idle after some time


    Hi guys,

    This is my first ever forum post, so pardon any ignorance. Starting from some time last week, my computer sometimes shuts down by itself after I leave it alone for around an hour or two. Upon restarting it, I get a message that says
    Windows has recovered from an unexpected error
    with the error type as BlueScreen. As my computer is usually in sleepmode when this happens, I often don't get to see the bluescreen itself. I have seen it happen in action once, however.

    Here are my basic system specs:

    Code:
    Operating System
        MS Windows 7 64-bit SP1
    CPU
        Intel Core i5 2500K  @ 3.30GHz    32 °C
        Sandy Bridge 32nm Technology
    RAM
        4.00 GB DDR3 @ 668MHz (9-9-9-24)
    Motherboard
        Gigabyte Technology Co., Ltd. Z68A-D3H-B3 (Socket 1155)    35 °C
    Graphics
        Acer G235H (1920x1080@60Hz)
        Intel(R) HD Graphics 3000
        NVIDIA GeForce GTX 560 Ti  
    Hard Drives
        977GB SAMSUNG SAMSUNG HD103SJ ATA Device (SATA)    30 °C
    Optical Drives
        ASUS DRW-24B1ST   a ATA Device
        DTSOFT Virtual CdRom Device
    Audio
        Realtek High Definition Audio
    I have attached my latest dump and system health report.

    Thanks.
    Last edited by Squakk; 13 Jul 2012 at 18:45.
      My Computer


  2. Posts : 26
    Windows 7 Home Premium x64
       #2

    Run a full scan of spybot,SUPERAntiSpyware, malwarebytes and eset online scanner.
    if they ask for a restart please do so.Don't run them together !
    Most probably your problem will be solved.
      My Computer


  3. Posts : 6
    Windows 7 Professional 64-bit SP1
    Thread Starter
       #3

    I have already run Malwarebytes multiple times with no problems so I'm pretty sure it's something else. I will try the other scanners.
      My Computer


  4. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #4

    Analysis:
    Both crashes were due to your MotioninJoy simulate Xbox 360 controller (virtual Xinput device). I do note that your XBox USB wireless controller is out of date. Update it if possible. If you cannot update it, re-install it.


    To fully re-install a driver, use the following steps.
    1. First, download the latest driver. Then do the next steps.
    2. Click Start Menu
    3. Right Click My Computer/Computer
    4. Click Manage
    5. Click Device Manager from the list on the left
    6. Find the device you are trying to uninstall by expanding the appropriate set of devices
    7. Right click the device
    8. Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
    9. Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    10. Restart your computer only if Windows asks you to.
    11. Install the latest driver for the device.


    Alternatively:
    1. Login as an adminstrative user.
    2. First, download the latest driver. Then do the next steps.
    3. Click Start Menu
    4. Click Control Panel
    5. Click Hardware and Sound
    6. Click Device Manager (the last link under Devices and Printers)
    7. Find the device you are trying to uninstall by expanding the appropriate set of devices
    8. Right click the device
    9. Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
    10. Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
    11. Restart your computer only if Windows asks you to.
    12. Install the latest driver for the device.



    You may also want to do some USB troubleshooting steps. When you do the steps, make sure your USB devices that are causing problems (XBOX related devices) are completely unplugged and removed from the system. Then do these steps:
    • Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
      1. Shut down and turn off the computer.
      2. Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
      3. "Remove the computer from any port replicator or docking station, disconnect
        cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
      4. Hold down the power button for 30 seconds. This closes the circuit and ensures all
        power from components is drained to clear the software connections between the BIOS
        and hardware and clear any corruption in the temporary memory.
      5. (If it is a laptop, plug the battery back into the laptop and then) Plug the computer back into the wall. Do not reconnect any unnecessary peripherals; monitor, keyboard,
        and mouse should suffice and be the only peripherals reconnected.
      6. Turn it on to reinitialize the software connections between the BIOS and hardware
      My Computer


  5. Posts : 6
    Windows 7 Professional 64-bit SP1
    Thread Starter
       #5

    Thanks, everything's all good now.
      My Computer


  6. Posts : 11,269
    Windows 7 Home Premium 64 Bit
       #6

    Glad those USB steps resolved it.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:51.
Find Us