New
#1
BSOD quite frequently. Persists after clean install
Installed latest drivers, had Windows installed several times but BSODs persist.
Installed latest drivers, had Windows installed several times but BSODs persist.
From what the files say it seems like possible memory corruption.
run a RAM - Test with Memtest86+
Post back results when finished.
Also, stop overclocking:Code:>!sysinfo cpuspeed CPUID: "Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz" MaxSpeed: 2830 CurrentSpeed: 3403
Memtest gave 8 errors after 21 passes. System hung, had to reset.
@writhziden If you noticed my memory is DD3 1600. In order to run at stock speed and timings, the system is slightly orverclocked (3.0Ghz not 3.4) to give a 1:2. I know its not the best configuration but there is no way to run a 1:1 without replacing memory.
Try putting your settings back to default as it could be causing memory corruption. Then if that does not work we will go from there.
Did that when i bought my hardware. Gave errors right away..
Your crash reports indicate a possible problem with your Windows installation. Please follow the Windows Genuine and Activation Issue Posting Instructions. Post the results in your next post; do not start a new thread.
Brink said:
What does this have to do with the memtest errors? My windows are genuine.
Please post up the report though. We are not allowed to continue if your windows aren't genuine according to forum rules. If someone has suspicion that they are not, then we need proof that they are.