Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after computer starts

22 Jul 2012   #1

Windows 7 Ultimate 64 bit
BSOD after computer starts

Guys please help me im getting BSOD in about 15 minutes i start the computer since today morning and its a pain ..... this is what the error report looked like

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8A00AB66000
BCP2: 0000000000000000
BCP3: FFFFF80003544079
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:

Guys please help me!!!

My System SpecsSystem Spec
22 Jul 2012   #2

Windows 8.1 Pro x64

Hello there,

Please follow this: So we can assist you better.
My System SpecsSystem Spec
22 Jul 2012   #3

Windows 7 Ultimate 64 bit

Thank you very much i have uploaded the necessary documents please help me ASAP ..... Thanks again in advance!!
My System SpecsSystem Spec

22 Jul 2012   #4

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

Several of your dumps have indicated memory problems. Please take the following test.
Run for 8 passes, then take each stick separately and test for 6 passes each.
My System SpecsSystem Spec
22 Jul 2012   #5

Windows 8.1 Pro x64

Thanks for posting the files,

Looks like you don't have SP1 installed. Please install Windows Updates and SP1 should be in there.

Also looking like some hardware problems. Please do the following:

BugCheck 0x124
You have a 0x124 hardware bugcheck. If the system is still under warranty, I would recommend sending it in to have diagnostic tests done and any bad hardware replaced.

warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden
After what rich does. Looks like he beat me :P
Please post back results.
My System SpecsSystem Spec
23 Jul 2012   #6

Windows 7 Ultimate 64 bit

guys im not that good with hardware and i dont understand how to do these please xplain to me step by step.... consider me a noob ..... thank you for your help .... please help me sort this out
My System SpecsSystem Spec
23 Jul 2012   #7

Windows 8.1 Pro x64

Each program in the list has a link to it, and should tell you how to do each step.
My System SpecsSystem Spec
23 Jul 2012   #8

Windows 7 Ultimate 64 bit

okai il check and let u know abt the progress
My System SpecsSystem Spec
23 Jul 2012   #9

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

Start with memory, it is the easiest and I think the most likely cause.
My System SpecsSystem Spec
24 Jul 2012   #10

Windows 7 Ultimate 64 bit

okai guyz i ran the memtest for 7 passes and no errors were found! And today i did nt have the bsod at all! What mite have been the likely cause
My System SpecsSystem Spec

 BSOD after computer starts

Thread Tools

Similar help and support threads
Thread Forum
BSOD when computer starts up
I've had my computer for about 2 years. Within the last 5 months been getting bsod. It happens when i log in about 1 or 2 times a week.
BSOD Help and Support
BSOD's in a matter of minutes as soon as computer starts up.
To begin, I'm a computer noobie. And I have a brand new rig built from scratch and it's only the 2-3rd day and I'm getting all these kinds of BSOD's. It was running perfectly fine then it started crashing. All my drivers are up to date and my Windows Update cannot update the Cumulative Security...
BSOD Help and Support
BSOD when computer starts from all 4 cores! / 0x0000000a, 0x00000124
Hey i have a serius problem with my cpu... (i think it's the cpu) anyway i got this hardcore BSOD that i cant break. I have uploaded this infomation to you so you maybe can help me out here. The problem is that i get BSOD when i set my cpu to work from all 4 cores, but when i only start from...
BSOD Help and Support
BSOD when my Computer starts to heat up slightly
At first I thought it was league of legends itself that was giving me System_service_exception 0x0000003B but then I was watching video and streaming radio and after a while my fan started running a little harder and then BSOD. Before all of this I had a bad hdd and I swaped it out for a new...
BSOD Help and Support
BSOD when computer starts, need help to analyse .dmp files
Hello! I have been having alot of blue screens, I can't have to computer on for more than 3 minutes before it blue screens and I have no idea what is causing it. There for i need help to analyse these .dmp files.
BSOD Help and Support
When computer starts wifi starts automatically?
Hello I bougth new Notebook Acer 5741G which has Windows 7 X64. When I start computer it always starts up automatically WiFi adaptor. Do you think is it possible to disable that function? I have tried to do that in many ways but I cant. Thank you in advance
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:08.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App