BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly


  1. Maroof83
    Posts : 1
    Windows 7 Home Premium 64bit.
       New #1

    BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly


    Hi All

    I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month.

    All drivers are upto date including the SSD as primary and the BIOS

    What happens is intermittent and my machine freezes for a few seconds then eventually starts BSOD and memory dumping.

    I have done a full memtest, hdd check, gfx card stress test etc. All is good.

    Theres even times I can be going for 12 hours straight without issues so Im not able to reproduce it unfortunately.

    Attached are the diag tools outputs

    Any help of course is greatly appreciated

    Thx

    Maroof
    Last edited by Maroof83; 04 Aug 2012 at 15:14.
      My Computer
    Quote Quote

  3. JaidynM
    Posts : 8,398
    Windows 7 Ultimate x64/Windows 8 Consumer Preview x64/Ubuntu 11.04
       New #2

    Hardware
    I see you have an SSD installed. SSD drivers are a common cause of BSOD's, in particular Crucial M4's with outdated firmware. Make sure that the following is up to date:

    writhziden said:

    • SSD Firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • Marvell IDE ATA/ATAPI controllers (older drivers for these are especially problematic)

    Software
    Run a full system scan with Malwarebytes.
    Malwarebytes : Free anti-malware download
      My Computer
    Quote Quote

 

  Related Discussions
My wife's Sony Vaio (VPCEE41FD) laptop has been acting up over the last few nights. It would hang up on shutting down, taking sometimes over an hour+ Just tonight it decided to BSOD stating driver_power_state_failure ntoskrnl.exe+7f1c0 If I recall, I think this happened about a month ago as...
Hello, I'm having blue screen errors on my Laptop which is only a couple weeks old and otherwise running fine. The BSODs aren't that many, maybe once a week while using the computer daily. Once it apparently was caused by me plugging in my USB mouse. Already did a memtest and chkdsk without...
My computer working always good most 1 bsod coming without reason? on a day i seeing not reason for this pc have not many load ram test with memtest working over 8 houres without problems here bsod logs anybody have idea?
BSOD f4, ntoskrnl.exe-7f1c0
in BSOD Help and Support

I have been getting a BSOD in my fresh Windows install, I'm running Windows 7 Pro x64 (MSDNAA). I had done a clean install after I got a couple of BSOD f4 but now I'm still getting the same BSOD! I've already collected some dump with and without running Driver Verifier. Before clean install I...
BSOD ntoskrnl.exe-7f1c0 while idling
in BSOD Help and Support

I have been getting a BSOD in my newly installed system and ive included the files in this post as you asked for before posting :) I am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 20:11.
Find Us