Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD 0x00000101 (normally under load)

09 Aug 2012   #31

windows 7 professional x64

I have just ran a test using OCCT and it produced some strange reading on some of the voltages. When using the GPU:3D test, and with using error checking after a 4 minutes, it detected over 10,000 errors, and as time went on more and more were being detected. Is there any way to analyse these errors, and could this be my prime suspect on dodgy hardware?
I have attached the graphs of the readings taken from OCCT on some of the voltages, temps. etc.


My System SpecsSystem Spec
09 Aug 2012   #32

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

I really cannot give you a definitive answer to your question, but it does seem that you are having problems with your GPU. This may or may not be the cause of the BSODS, but it is something that has to be looked into. Dont even know if you can upgrade your particular GPU as it may be part of the MB. All that I can tell you for certain is that you need to correct the situation before looking further.
My System SpecsSystem Spec
09 Aug 2012   #33

windows 7 professional x64

Got another BSOD, which had the same 101 code, but the other codes were different. Is this dumpfile any different?
My System SpecsSystem Spec

09 Aug 2012   #34

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

I have bolded the salient parts of your report. You will see where the problem lies.

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Richard\AppData\Local\Temp\\080912-8626-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e02000 PsLoadedModuleList = 0xfffff800`03046670
Debug session time: Thu Aug  9 13:33:51.375 2012 (GMT-4)
System Uptime: 0 days 0:23:00.359
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
Use !analyze -v to get detailed debugging information.
BugCheck 101, {19, 0, fffff88003174180, 7}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Followup: MachineOwner
My System SpecsSystem Spec
10 Aug 2012   #35

windows 7 professional x64

Ok, so hardware wise I have tested the RAM with memtest and found no errors. I have stress tested the GPU and I did find some errors, but after installing an old nvidia 8800GTS, I suffered the same BSOD as I would with my normal gtx 560 ti. Prime95 has been run twice for over 12 hours altogether, and found no errors. Could it be that the mobo is faulty, or not compatible with my current setup ?
My System SpecsSystem Spec
10 Aug 2012   #36

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

Lets try the driver verifier. If it is a driver problem, this will show. If this comes up negative, thats just one more indication of hardware.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because
Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable
My System SpecsSystem Spec

 BSOD 0x00000101 (normally under load)

Thread Tools

Similar help and support threads
Thread Forum
BSOD error 0x00000101
Hello all. Been awhile since I have been on the forum, but I had a Blue Screen of Death last night, and can't say I have ever had in the past on this computer I had mirc running, and watching Divx, and a browser open I believe. I also use Adtrap and had it enabled. Filename in question was...
BSOD Help and Support
Random BSOD 0x00000101
Hello, I have an issue. Apperantly my PC rarely and randomly BSODs. Like either watching a video or playing a game. Here is my PC. Processor - Intel i5 3570K @ 3.40GHz Memory - PC3-12800 Crucial 8GB DDR3 Hard Drive 1 - Samsung HD320KJ (320GB) Hard Drive 2 - WD Blue 640GB Video Card -...
BSOD Help and Support
BSOD 0x000000c4 and 0x00000101
BSOD 0x000000c4 and 0x00000101
BSOD Help and Support
BSOD while trying to fix my computer 0x00000101
I have been receiving a ton of BSOD's lately. My computer was working one day. then the next day i clean it and turn it on and I can't watch videos full screen and none of my games work. all cause BSOD. I have no idea how to fix it so hopefully you kind people can help me out. It would be greatly...
BSOD Help and Support
BSOD Error 0x00000101
Recently I built my own pc and randomly while using it I am getting the BSOD error, mainly when trying to play games. I get the error; STOP 0X00000101 (0X0000000000000031, 0X0000000000000000, 0XFFFFF88002F64180, 0X0000000000000002). This has been annoying me to no end and I cannot seem to find the...
BSOD Help and Support
BSOD 0x00000101 and 0x0000009c
I made a post a while ago that never got resolved because I couldn't retrieve the error reports from my PC. It's been a couple weeks but was finally able to get them off my PC. Could someone take a look at my thread and let me know if they can see what's causing my PC to BSOD? Perfmon/error reports...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:17.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App