New
#11
memtest86
Ok, I left my PC on over night and managed to do the 8 passes on while both sticks were in, then I did 6 passes on each stick (tried each stick in a different slot). No errors came up. I then tried running a game whilst using only one stick of ram, again in different slots, and the pc still BSOD like normal.
I noticed on the memtest that when it was testing, it showed 800hz, and a 6-6-6-20 timing, when my memory is 1600 9-9-9-24. I also have a 64 bit system, but the program shows x86. Is this all normal?
Thanks for the help.