Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: 0xF4, 0x7B, 0x7A BSOD with new SSD, leaning towards motherboard?

14 Aug 2012   #1

Windows 7 64 bit
0xF4, 0x7B, 0x7A BSOD with new SSD, leaning towards motherboard?

I received my new Samsung 830 Series 128GB SSD yesterday and mostly set up everything, experiencing blue screens along the way...

I'll start with some previous problems that I think are contributing to these errors. I built this computer a little over a year ago. Shortly after I noticed my DVD drive bringing up atapi errors in the event viewer and eventually not showing up at all after being on for a while, which was mostly OK because I was barely using it, and usually a restart it would show up. Later, I started getting errors with my wireless card I had installed into the PCI slot; it would drop connection and the device would "fail to start." I began speculating that it was my motherboard. I tried using a Wireless USB adapter, and that has worked fine, only needed to hold over until I moved (able to use Ethernet now).

Probably around 2-3 months ago, I have started experiencing freezes on my 1TB (Samsung F3 Spinpoint) where the disk activity would reach 100% and any program that I clicked on would also freeze, but programs that didn't need to read/write worked fine (Mumble/ventrilo) as it was freezing. Freezing would occur most successfully when I was downloading something. Other times it was seemingly random. In the event viewer there are TONS of errors regarding atapi and the IdePort (the device controller, Driver detected a controller error on \Device\Ide\IdePort#) that the main drive is on. I've tried updating the intel chipset drivers and many other things. I tried changing to every other port, swapping out cables, and using my smaller drive with windows on it to see if the IdePort errors would follow, they did. I ran HD Tune to see if my drive was going bad, SeaTools, etc. and all look just fine. I bought an SSD because I was interested in trying it out and to see if maybe a new install with a new drive could help.

I haven't seen the mass amount of atapi errors following it, but something similar but not too often. I have seen an atapi 9 (I believe) error regarding IoStor pointing to the ideport, but no long freezes. I am now getting BSOD's regarding page filing and stuff regarding device controllers, etc. that I believe could be the cause of a bad motherboard.

The dumps attached in the zip file are the ones that were recorded. The other blue screens that arent being written to the dump file are:

KERNAL_DATA_INPAGE_ERROR : 0x0000007A (0xFFFFF6FC40049B08, 0xFFFFFFFFC0000056, 0x000000010A291BE0, 0xFFFFF88009361000)

STOP: 0x000000F4 (0x00000000000000003 (may be missing a zero), 0xFFFFFA800AC38060, 0xFFFFFA800AC38340, 0xFFFFF800033CF5D0)

With some variations to the parameters and maybe a 7B STOP as well, dont have teh full pictures with my phone.

I've had my page file set to 512mb on my SSD, have had it set to system manage on my 1TB and SSD, and I have also tried changing the set size and now have just left it at letting the system automatically manage.

The last 2 times I have tried to do Windows Update, while downloading/installing it has given blue screens. While having a video paused and open in Media Player Classic, had a youtube video going and it blue screened after everything was slowed down to a crawl (really slowed down audio, etc..)

Most errors I keep seeing and what I have researched always mention device controllers or disk not being able to read or write during a certain time (device controllers bad?)

Had a few of these when first installing programs on the new install, now I just got it again (thought it was gone):

Display driver nvlddmkm stopped responding and has successfully recovered.

My System SpecsSystem Spec
15 Aug 2012   #2

Windows 7 64 bit

Ok so the 100% highest active time (the long freeze where all things will hang) is back it seems on my SSD, hung for about 2-3minutes with the error in the event log showing:

The device, \Device\Ide\iaStor0, did not respond within the timeout period.


The Windows Error Reporting Service service entered the running state. (and the stopped state in the same second).
My System SpecsSystem Spec

 0xF4, 0x7B, 0x7A BSOD with new SSD, leaning towards motherboard?

Thread Tools

Similar help and support threads
Thread Forum
BSOD upon wake from sleep (0x7A, 0xF4)
Hey all, Recently I've run into a problem where, upon resuming from sleep, I receive a blue screen. It usually appears after entering my login information and hitting enter. Other times, I will proceed to the desktop before the crash appears. Turning off the computer and back on does not result...
BSOD Help and Support
0x7a and 0xF4 BSOD
I've been getting frequent 0x7a and 0xF4 blue screens for a while now and for the past couple days my computer would just freeze up and I would have to force a shutdown with the power button. Any help is greatly appreciated.
BSOD Help and Support
BSODs 0xf4 and 0x7a After Installing New SSD
Hello guys, I'm really hoping somebody can help me because I'm at my wit's end! A few months ago, I bought a Crucial M500 480Gb SSD for my Vaio laptop, but since then I've been plagued by two different BSODs, 0xf4 (CRITICAL_OBJECT_TERMINATION) and 0x7a (KERNEL_DATA_INPAGE_ERROR). I've used...
BSOD Help and Support
BSOD witn new SSD intel 520 0xF4 and 0x7a
Received as a present a brand new SSD Intel 520 180GB. Tried to install Win 7 Ult x64 and Win 7 Pro x64 from different discs. Have the same errors, sometimes 0x000000F4, sometimes 0x0000007a. It happened during installation updates from MS or when I surfing via FireFox. Contacted Intel support,...
BSOD Help and Support
0xF4/0x7A BSOD Issues while Gaming
Since I updated to Windows7 x64 SP1 I am repeatedly getting BSODs only when playing games e.g. Witcher 2, Alice, Sanctum, Hunted: Demon's Forge, Hydrophobia, Left4Dead etc. (not really entirely reproducible) Some other games, even 3D intensive ones either run without issues or I haven't run into...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:08.
Twitter Facebook Google+