Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


15 Aug 2012   #1

Ultimate N 64

I got a MEMORY_MANAGEMENT BSOD while browsing the internet yesterday, then some hours later, while playing a game, I got the DRIVER_IRQL_NOT_LESS_OR_EQUAL one. The next day, I got another MEMORY_MANAGEMENT while watching a video. This is a new system, about 1 month old, so I'm pretty worried about this.

I also noticed that I got some corrupted downloads in the last few days, though that could be a coincidence.

After getting the second BSOD, I left the windows memory test running overnight, doing an extended test. It did two passes and found no errors. Chkdisk found nothing either. I noticed the WMI errors (event ID 10) in the event log around the same time that I got the BSOD and ran the script MS provides to fix it, though from everything I read it was probably a coincidence and unrelated to the BSOD. It did not happen again after I fixed it but it hasn't been long since I ran it.

Other than that, I haven't noticed anything wrong or different. I'd appreciate any advice on this, I need to be prepared in case I need to replace something as I can't afford any downtime Thanks in advance.

My System SpecsSystem Spec
16 Aug 2012   #2

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install

Your BSODs reports are pointing toward a driver problem. Driver verifier will help rule out this possiblity or give us a particular driver as the cause.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because
Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

Driver Verifier - Enable and Disable
My System SpecsSystem Spec
17 Aug 2012   #3

Ultimate N 64

Hi Richard, thanks a lot for the reply :)

Unfortunately, I didn't get a chance to try the driver verifier because last night I was getting random application errors all the time and even more corrupted downloads, so I decided to buy a CD and give Memtest a try. It only got to test #4 and had already found almost 40,000 errors. Through trial and error I found the stick responsible (and now the PC won't even boot if the functioning stick is removed). Everything has been working fine since I removed it.

Thanks for your time!
My System SpecsSystem Spec



Thread Tools

Similar help and support threads
Thread Forum
having random bsods. ran bluescreenview & found bug strings : PAGE_FAULT_IN_NONPAGED_AREA & MEMORY_MANAGEMENT. dont know how to get rid off it. :( help guyz
BSOD Help and Support
Constant MEMORY_MANAGEMENT bsods - please help
Hi all, I've recently had my computer repaired (previous problem seems fixed) and I've had it back about 5 days. for the last 3/4 I've had 3-4 MEMORY_MANAGEMENT BSODs a day, and I'm not sure how I should proceed. The SF Diagnostic tool file is attached. Any help would be greatly appreciated....
BSOD Help and Support
Hi all, been lurking here a while since regedit stuff for memory card readers (Brink?)during the W7 Beta. It seems you guys come top of the pops regarding STOP errors on Google so I'm all registered and hoping to work it out. Now my recently running well computer has started with random...
BSOD Help and Support
Random BSODs, MEMORY_MANAGEMENT, ntoskrnl.exe
Hello, I was hoping someone could help me with a recurring BSOD issue. There doesn't seem to be any pattern as to when they occur; sometimes it will be a month in between instances, othertimes a day or a week. I've followed the instructions here: ...
BSOD Help and Support
Im having lots of trouble with my machine going bsod with the notice "MEMORY_MANAGEMENT". Looking around it seems the most likely cause is faulty memory. My memory does fail memtest86. However, using either one of my 2 memory modules alone leads to no bsods. One week ago, trying to solve the...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:18.
Twitter Facebook Google+