New Windows 7 random black flicker and BSOD

lga316 · 20 Aug 2012

Hello,,so i install Windows 7 on my computer(Upgraded from windows xp)..and everything seems well,HOWEVER at random times it (sometimes it flickers black) goes into BSOD then restarts again to windows,,the DMP shows different kind of problems like
MEMORY MANAGEMENT FAILURE"
IRQL_NOT_LESS_OR_EQUAL
"]"SYSTEM SERVICE EXCEPTION
,..you guys have any fix to this? will really aprreciate it tnx!

f.y.i I recently bought two 2gb ddr2RAM and i am now using it

HonorGamer · 20 Aug 2012

Hello,

MSINFO Analysis:

Code:

Unknown Device	USB\VID_0000&PID_0000\5&306FACF1&0&1	43

What hardware do you have plugged into your USB ports?

Code:

Start Menu\Programs\Driver Detective

Programs that automatically install drivers for you sometimes install the incorrect drivers. So please uninstall.

Dump Analysis:

Code:

MEMORY_MANAGEMENT (1a)

As you said you recently bought and installed new RAM sticks. It is possible that these COULD be faulty sticks. So run a RAM - Test with Memtest86+ to test them to be safe.

Code:

Event[1861]:
  Log Name: System
  Source: Disk
  Date: 2012-08-19T10:03:01.175
  Event ID: 11
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Louise-PC
  Description: 
The driver detected a controller error on \Device\Harddisk1\DR2.

I have found several one of these errors in the Even Log file. I believe this is caused by hardware devices. Even USB. So please be sure the answer the above question about your USB devices.

Finish this and then post back results.

-Justin

lga316 · 20 Aug 2012

The hardware in my USB port is my card reader with a microSD card inside....
I also uninstalled the driver detective
..I didnt finish the Memtest because im late in school(It was in Test#8 i think when i stop it),But i will continue it when i get home, i saw something weird though ,while in the Memtest screen i saw in the Settings-
"Settings : RAM:400MHZ(ddr800)/ CAS: 6-6-6-18 / DDR2(64 bits)"
...........whats weird to me is it reads "400mhz" ,while my RAM is actually 800mhz each ,(my old RAM is 400mhz though),,,so waht do you think?..
Oh,and do you think my Anti-virus can also be one of the cause of my BSOD?...im using AVAST

darelsteilz · 21 Aug 2012

same problem

this is my dump zip hope someone can help me on this
problem started being noticed once i tryed installing " TERA " for the pc
im pretty sure the problem was there before just it wasnt happening this often ( constant BSOD's while installing cant even finish cause of it )

darelsteilz · 21 Aug 2012

Please someone take a look at this. Im running desperate and even willing to do a big pc hardware upgrade ( have like 200euros aside atm that i could use ) but i need some advice before i can do anything..

lga316 · 21 Aug 2012

Well, i solved mine..turns out my new RAM has a bad BIOS timing...dont know about you though

HonorGamer · 22 Aug 2012

darelsteilz please go make a new thread so this can be taken care of the correct way, and without any confusion.

Iga316, I am sorry about my late reply and life got me in a bunch right now. I am happy you solved it. But to be safe wait another week to be sure. Then come back and tell us.

-Justin