They're STOP 0x7F's not 0x7E (which is the one with the hotfix).
If you are overclocking, please reset the system to default settings (no overclocking) until we're finished troubleshooting this problem.
The most common reason for the STOP 0x7F is failing memory modules. I'd suggest that you run a bootable memory diagnostic on your system. Here's a link to a how-to on my website: Memory Diagnostics
Please post back with the results of the memory diagnostic and we can move on from there.
You also have these older drivers on your system - I'd suggest updating them:
Code:
livecamv.sys 2/5/2007 5:36:46 AM Creative Livecam driver
OEM05Vfx.sys 3/5/2007 6:55:47 AM Creative Camera OEM005 Video VFX Driver
OEM05Afx.sys 6/8/2007 4:00:36 AM Creative Camera OEM005 Video VFX Driver
Rtlh64.sys 6/25/2007 1:37:13 AM Realtek Networking driver
OEM05Vid.sys 7/20/2007 2:37:49 AM Creative Camera OEM005 Video VFX Driver
This article states that a Double Fault (which you are getting) is most commonly caused by an malfunctioning kernel mode driver (but hardware is a close second): General causes of "STOP 0x0000007F" errors
Normally a Windows component (such as netio.sys) is presumed to be good unless we've got other evidence that points to it (which we don't have here). But it does give us a clue that this issue may be due to networking issues.
Also, visiting Windows Update should take care of most issues with the file if it is a problem.
Also, there's mention of tcpip.sys in the stack text - which further points to networking issues. Add to this the outdated networking driver (Rtlh64.sys) and we're pretty sure that that's the problem here.
So, go to Realtek and download the appropriate Win7 driver for your OS (32/64 bit) and network card. If they don't have Win7 drivers, download the appropriate Vista driver.
Then uninstall the current Realtek drivers from Control Panel...Programs...Uninstall a program. Then check in Device Manager...Network Adapters to ensure that it's uninstalled. If it's not, then right click on it and select "Uninstall"
Then install the freshly downloaded driver. If it's a Vista driver - right click on it, select Properties, then select the Compatibility tab. Click on the "Change settings for all users" button, then select "Run as Windows Vista" and "Run as administrator". Click on OK to exit the dialogs, then double click on the driver to install it.
Reboot an monitor for further BSOD's.
Here's a summary of the BSOD's:
Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Sep 15 20:56:10.544 2009 (GMT-4)
System Uptime: 0 days 1:04:46.229
BugCheck 7F, {8, 80050031, 6f8, fffff80002a78591}
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Sep 15 20:59:27.040 2009 (GMT-4)
System Uptime: 0 days 0:02:30.726
BugCheck 7F, {8, 80050031, 6f8, fffff80002ac93f0}
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Sep 15 21:02:40.584 2009 (GMT-4)
System Uptime: 0 days 0:02:29.285
BugCheck 7F, {8, 80050031, 6f8, fffff80002ad93f0}
Probably caused by : NETIO.SYS ( NETIO!CompareSecurityContexts+6a )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System