Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after installing new Graphics Card, error 0x000000101

04 Sep 2012   #1
theone320

Windows 7 Pro x64
 
 
BSOD after installing new Graphics Card, error 0x000000101

So, like the title says, I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock?


PSU: Enermax EMG700AWT

*edit*

So I used Afterburner to set my core clock to -104 and my power limit to 72% and this causes my card to boost to about 980MHz. With these settings the crashing has stopped. So the card cannot be used with the factory OC settings. So should I RMA?


My System SpecsSystem Spec
.
05 Sep 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello theone320.

► As far as I am seeing, you are not overclocking.
Code:
kd> !sysinfo cpuspeed
CPUID:        "Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz"
MaxSpeed:     2670
CurrentSpeed: 2666
► Your dumps say stop 0x101, hardware related. Mostly CPU is the guilty for it.
Hardware - Stress Test With Prime95

► Test the graphics card, too!
Video Card - Stress Test with Furmark

► Another one generates 0x9C, which is just similar to 0x124.
Follow the suggestions, thoroughly: Stop 0x124 - what it means and what to try

► Are you still using IE8? Better you shift to IE9.

▼ But, the first option would be, ask the vendor to check the graphics card, and if it is faulty, get a replacement.
My System SpecsSystem Spec
06 Sep 2012   #3
theone320

Windows 7 Pro x64
 
 

It is not the CPU. I know that 100%. I sent the card back and requested a replacement. My old gpu is now back in and is causing no problems.
My System SpecsSystem Spec
.

06 Sep 2012   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Very good to know!

101 pool corruption may occur due to the fault of CPU, GPU or even RAM, hard to determine which one is causing it actually.

Your base knowledge on your system worked!
My System SpecsSystem Spec
Reply

 BSOD after installing new Graphics Card, error 0x000000101




Thread Tools




Similar help and support threads
Thread Forum
BSOD after installing new graphics card.
Hi everyone, thanks in advance for any help you can offer to help me resolve this issue. I just bought a new computer and instead of junking my older one I was trying to upgrade the video card and pass it down to my younger brother as it is a substantial upgrade over his current rig. My...
BSOD Help and Support
BSOD after installing new Graphics Card
I recently installed a new gtx970-sc in my gaming rig. After random amounts of time playing games (usually over an hour), the graphics driver "nvlddmkm" stops responding. Most of the time the driver recovers but a few times it has crashed my computer to where my monitor receives no signal, while...
BSOD Help and Support
Randoms BSOD, error 0x000000101
OK i am getting random BSOD's. I seriously trying from past month to find the cause of this BSOD and solution but can't find any. Error code is 0x101. Here is the latest minidump file.
BSOD Help and Support
Blue screen ACPI error after installing a New Graphics Card plz HELP
I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine... Can anyone help me with this error or know how...
Installation & Setup
Blue screen ACPI error after installing a New Graphics Card plz HELP
I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine... System is a cpl years old OS INSTALLED ON NEW...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:35.
Twitter Facebook Google+