Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD (page fault)after login and runs fine in safemode

04 Sep 2012   #1

Win 7 x64
BSOD (page fault)after login and runs fine in safemode

I am getting BSOD constantly.
This started happening after I took apart my computer, installed a new cpu fan, and put it back together.
I have tried lots of things, so far no luck.
I am attaching my win7 SF diagnostic files, which has all the minidumps in it.

The bluescreen at the beginning was always
PAGE_FAULT_IN_NONPAGED_AREA, but I also get alot of
It does not happen before I login, or while I'm in safe mode.

I ran memtest86+ and windows mem diagnostic, no problems there
I'm pretty sure my hard drives are fine.
I've tried disabling all startup services and programs, it seems to help a little, but I eventually bluescreen while using the computer.
At this point the only thing I assume it could be if not fault hardware, is a driver problem.
After I ran out of ideas, I started looking up things and found driver verifier, I turned that on and well, instantly bluescreen after logging in, lol, however I have not been able to make sense of any of the minidumps.

I was going to update my system drivers, especially my chipset driver, but while I was trying things, I saw that the windows installer service doesn't run in safemode, which might be what some of my drivers use, so I wanted to ask here first.

Please save me, lol

Ps. I just realized that the latest 3 or 4 dumps had driver verifier on Microsoft as well...I am currently running a non Microsoft driver verifier test..I will post the result asap

*New info* I may have fixed my problem, will mark this solved and post reasoni f I don't get a bluescreen in the next 24 hours

*edit* problem is solved
When I built my computer, I overclocked it ot 3.9 gigs, and found out that the max was 4.2 gigs
When I took out the cpu and put it back in while replacing the cooler, my motherboard thought it was a new cpu.
It kept my overclock settings, but for some reason enabled turbo mode.
I was already at 3.9 and turbo mode pushed it to around 4.4, with extra voltage.
I simply disabled turbo mode, and well....problem solved
Heh, its always something simple, that I make super complicated when my computer messes up.

My System SpecsSystem Spec
05 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Welcome to the forum,.
Sorry that you did not receive any response on your problem but thanks for letting us know what you found out.
My System SpecsSystem Spec

 BSOD (page fault)after login and runs fine in safemode

Thread Tools

Similar help and support threads
Thread Forum
Computer BSOD on startup and restarts, boots fine into safemode
My computer boots fine into safe mode, but when i try to boot normally computer gives me BSOD and restarts automatically, the nvidia drivers or my GTX 460 are causing the problems. It boots fine normally when i select standard VGA driver in device manager for my GTX 460 Things i have tried...
Graphic Cards
BSOD mostly when playing mmos page fault non page error
this is my 1st post so i hope im doing everything right. ive had this problem from the beginning, when i built this computer. it just happens more so when im playing online games. i get 3 different errors the most common one is the page fault non page error the other two are dxgmms1.sys and memory...
BSOD Help and Support
Constant BSOD if not in Safemode, Page fault in non paged area
I constantly bsod on reboot. Yesterday I took out my graphics card because i was selling it in an old computer. It was a ati 4770. I threw in an old xfx 8500 gt because my motherboard doesnt have an internal gfx. It ran for about an hour or so and then i started getting this BSOD. Not thinking I...
BSOD Help and Support
Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs
Guys.. I been facing some issues with my relatively new CPU. I have an Intel i5 2400 cpu, combined with 4GB DDR3 memory. Mobo is DH67BL - revision 3. No GPU installed. Power supply is via Corsair VX450. Problem i been facing: 1) BSOD saying that A clock interrupt wasnt recd.
BSOD Help and Support
installs fine, runs fine, reboots..not fine
hey guys so i finally decided to install win7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc) so i rebooted, same...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:17.
Twitter Facebook Google+