New
#31
Take your time and keep us posted.
Safe weekend.
Ran SeaTools, and found nothing yet on the short tests, leaving it overnight on the long ones. Uninstalled EasySaver and GVTDrv64.sys is gone, and gdrv.sys is now .old. How hot is too hot on the CPU and GPU temps? (in deg C).
Will run Prime95 tomorrow, I started it today, and was getting some high temps on Speedfan for Temp1, Temp2, and Temp3. (65 deg C), so I stopped it. Do you know what those are temping? Also, the GPU temp is idling at 54 deg at 10% processor usage and no games running, hich seems high.
Its obvious for temps to go higher during stress tests. My CPU stays at 46C at idle and varies between 51>52 while in use. I'm no gamer but my GPU temp stays at 51>52; I use my pc for mainly browsing, debugging (recently) and photoshop (occasionally).
To me any temp for CPU higher than 65C is hot, 70C> is too hot.
Anyway, during the prime95 test if the temp reaches goes above 80C, stop it and let us know. No games are running does not mean that the gpu is idle. It is working %54 degree is not high, but tends to go up.
Ran all 3 tests for a few hours each. The only thing that was slightly concerning was one of the mother board temp sensors hit 75 deg C on both SpeedFan and HWMonitor. (See attached)
No, I got no BSOD. Will download Speccy tonight, and run the tests some tomorrow, and let you know what it says.
Went ahead and ran now. Speecy gave same temps as the other 2 for GPU, CPU, and so on. It just doesn't show a temp for whatever Speedfan displayed as temp2.
I did notice while playing Starcraft II (Running settings on Extreme like usual) today that my GPU temp on Speecy and SpeedFan went up to 80 deg C. It never peaked over 80, but just as a precaution I ran a couple different GPU Stress tests. I tried both MSI Kombustor(Since that is the manufacturer of my GPU) , and OCCT (as recomended by sevenforums.) Both never got the GPU temp over 75 deg because fan speed would just increase with the intensity. The fan speed never passed 75% speed.
Max CPU core temps for AMD Phenom II x6 1090T is 67°C
The GPU should have a max of 90°C, 80°C is ok for running high settings on games.
Undefined temps on monitoring programs are difficult to find info on, they are different on each program version and each motherboard.
If I had to guess I would say TMPIN1 is your GPU.
What was the CPU core temps during the Prime95 tests?
Have you updated all your drivers from the Gigabyte support site?
Gigabyte GA-890FXA-UD5
There are several recent ones.
Uninstall all of the Gigabyte utilities, these are known to cause crashes.
Your last cash was cause by gdrv.sys - Gigabyte Easy Saver - mobo power utility driver
Another gigabyte utility driver that's out of date.Code:STOP 0x000000C1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION Usual causes: Device driver, ?Memory Special pool has detected memory corruption. DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP IMAGE_NAME: gdrv.sys - Gigabyte Easy Saver - mobo power utility driver FAILURE_BUCKET_ID: X64_0xC1_24_VRF_gdrv+30c7
rtkio.sys Sat Jun 2 2009 - Gigabyte Smart Dual LAN - uninstall
Find a more recent version of TeamViewer
teamviewervpn.sys Thu Dec 13 17:22:09 2007 - out of date
Lets check some settings.
Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller (CPU NB VID Control) voltages are.
Quick review of all your crashes seem to be blaming the graphics driver mostly, also memory and DirectX.
Uninstall your graphics driver with Programs and Features, then with Driver Sweeper.
Install an older version of the driver, you may need to do this a couple of times to find one that is stable.
Let us know if you have any questions.
Last edited by Dave76; 18 Sep 2012 at 03:57.
What was the CPU core temps during the Prime95 tests? 63-64 deg C average during the test. If I do anything else on the computer while Prime95 runs the temp went as high as 66 deg C.
Just updated all drivers. Did not upgrade BIOS because I'm doing this from school via Teamviewer.
About the graphics driver, koolkat had me do that already, and the driver I installed was the current stable build. (Previously I had the BETA version)
Pics attached.
Will get you voltages later when I get home.
Thanks for all the help so far from both of you.