BSOD Random startups. No program triggers it.

Hey all, first time here at the Forum. My computer is almost two years old, custom build. For the past six or seven months or so on some random startups it goes BSOD before restarting. Sometimes on the restart it goes BSOD again, sometimes it starts up just fine. Once Windows is up and running, I have no problems with it. Attached is a zipped folder of what I found using the SF-Diagnostic tool. Hopefully I made the file alright. Let me know if you need any more info. Thanks guys!

Welcome aboard.

► Most of your crashes are CRITICAL_OBJECT_TERMINATION, BugCheck F4.

Code:

 ....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa8008ec9b30, fffffa8008ec9e10, fffff80002f8c510}

Probably caused by : wininit.exe

Followup: MachineOwner
---------

I will ask you to have a check. Run the computer in safe mode for a few hours. Let us see if it is crashing in safe mode too, or not.

This information is highly necessary.

► One of the dumps shows tcpip.sys as the probable cause. It is network related. So let us update the network driver.
upgrade the network driver:

1] download the network card driver from manufactuer's website.
2] Then reinstall the driver:
3] Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
4] Double click to expand "Network adaptors".
5] Right click your network card and click Uninstall.
6] Check "Delete driver software for this device" check box, click OK.
7] Restart the computer

If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.

Let us know the results.

Wait couple of days, study how the machine behaves with the new driver.

But if it crashes in between, inform us.

This time it is Stop 0xF4.

Going through your dumps, I got some repeated errors in NTFS Common Read. So, we should first take steps to prevent it.

Do the following things:

1. Reseat the sata and power.
2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
3. Seatool for dos: SeaTools | Seagate download
   Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

Report the results back.