Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD at Login Screen - ThinkPad T60p

01 Oct 2012   #1

Windows 7 Ultimate x64
BSOD at Login Screen - ThinkPad T60p

I've been having random BSODs at boot right as or just after the login screen appears with my ThinkPad T60p (type 2623-8YU if that helps anyone.)

Specs: Windows 7 Professional x32
Core Duo T2500 2GHz
2GB PC2-5300 RAM, tested with Memtest86+ to be free from errors
120GB WD WD1200BEVS-08UST0 hard drive, SMART status okay, chkdsk /f performed
ATI Mobility FireGL V5200, Catalyst version 10.2 installed using MobilityModder

My System SpecsSystem Spec
02 Oct 2012   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Hello Kasm279.

► Free up the startup. You hove 30 programs in startup.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept the restart.
Overclocking failure.
Unloaded modules:
8ecbc000 8ecc8000   ATITool.sys
80786b04  8ecbc000 <Unloaded_ATITool.sys>
80786944  8ecbc000 <Unloaded_ATITool.sys>
Run ATITool. Set everything to default, and then uninstall it.

Intel Rapid Storage Technology
80786000  8e0f60d0Unable to load image \SystemRoot\System32\Drivers\dump_iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dump_iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for dump_iaStor.sys
80786004  807860bc
80786008  8e04340d dump_iaStor+0xb40d
8078600c  8e0f60d0 dump_iaStor+0xbe0d0
80786010  80786214
80786014  00000001
80786018  8304e020 nt!WRITE_REGISTER_ULONG
8078601c  8e0f60d0 dump_iaStor+0xbe0d0
80786020  8e0438d8 dump_iaStor+0xb8d8
Uninstall it.

Uninstall the following programs , too.

  • Catalyst Control Center
  • HD Tune
  • Lenovo ThinkVantage
  • Lenovo ThinkVantage Tools
  • LogMeIn Hamachi
Uninstall those using Revo uninstaller, which you already have.

One thing made me astonished here ....
As per the MSINFO file, you have a very old ATI driver
Driver    c:\windows\system32\drivers\atikmdag.sys (, 4.24 MB (4,450,816 bytes), 2/11/2010 0:42)
But no display drive I found in bugchecking. If you Use ATI, update the drivers.

Your network driver is also very old.
Driver    c:\windows\system32\drivers\netw5v32.sys (, 4.04 MB (4,231,168 bytes), 6/10/2009 15:18)
update the network driver.
First, download the network card driver from manufactuer's website, Download Cente
Then reinstall the driver:

  1. Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
  2. Double click to expand "Network adaptors".
  3. Right click your network card and click Uninstall.
  4. Check "Delete driver software for this device" check box, click OK.
  5. Restart the computer
  6. If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.
Let us know the results.
My System SpecsSystem Spec
02 Oct 2012   #3

Windows 7 Ultimate x64

Augh, I hate it when programs leave things behind. ATItool was uninstalled months ago. The Catalyst drivers are old because they are the last ones that support the older DX9 graphics chipsets, which the FireGL V5200 and Radeon X1600 are. Also, the BSODs were happening before I installed Hamachi, so I'll leave that for now, as well as ThinkVantage, which I can't really uninstall anyway, being a laptop. I did uninstall HDTune, but ATITool isn't in the list in Revo, nor can I find it anywhere else. I remember uninstalling it with Revo after trying to use it to read temps from the graphics chip...
My System SpecsSystem Spec

02 Oct 2012   #4

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Your wish. Sorry that I tried to help.
My System SpecsSystem Spec
02 Oct 2012   #5

Windows 7 Ultimate x64

Quote   Quote: Originally Posted by Arc View Post
Your wish. Sorry that I tried to help.
Err, sorry. I didn't mean to come across that way. Anyway, I removed ATItool before but apparently it left stuff behind, HDTune has now been removed. I'm not sure what Intel Rapid Storage Technology is, but I don't have anything installed by that name...

Anyway, at the moment I can't uninstall Catalyst or any of the ThinkVantage tools, but I can try this weekend. I will try uninstalling Hamachi, but crashes were hapening before both Hamachi and Catalyst were installed. (I was using the drivers from Windows Update before.) I'm currently updating the network driver. So far I haven't had a crash, but that doesn't mean anything.
My System SpecsSystem Spec
03 Oct 2012   #6

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Well, a gentleman can help another one.

Download and install Driver Fusion, delete ATITOOL.sys using it.

Then, download and install CCleaner. Run it, and click on the "Tools" tab.
Attachment 234854

By Default, it will open the "uninstall" window. Click on the "save text file" button.
Attachment 234855

Save an "Install.txt" file on the Desktop.
Attachment 234856

Zip it and upload it.

We need it, coz the Intel Rapid Storage Technology is the direct cause of your crashes. To uninstall it, it is to find out at first.

Before nullifying another person who is helping you on your request only, think about the effort that the person put there for you only. The attitude you showed in your first reply is most unwelcome, and does not reflect something good, too. We all are concerned about our self esteem, isn't it? And it reflects mostly in our attitude, in our behavior.
My System SpecsSystem Spec
03 Oct 2012   #7

Windows 7 Ultimate x64

Again, I didn't mean to offend you, nor did I mean to blow off your advice. Anyway, here's the install.txt. Also, I have no clue how I am supposed to use Driver Fusion. How might I find the ATITOOL.sys in it?
My System SpecsSystem Spec
04 Oct 2012   #8

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Intel storage is not in installed programs list, unfortunately. Search it in Revo's window, if it is listed.

For ATITool, use Driver fusion this way ...
Attachment 234974

Whatever, seeing the messy state of your computer, IMO it is better to start fresh.
My System SpecsSystem Spec
04 Oct 2012   #9

Windows 7 Ultimate x64

I tried searching for Intel stuff in Revo couldn't find anything about the storage stuff. I also couldn't find ATITOOL.sys in Driver Fusion. I've been meaning to do a full reinstall, but I've been so busy with school and stuff lately that I haven't been able to.
My System SpecsSystem Spec

 BSOD at Login Screen - ThinkPad T60p

Thread Tools

Similar help and support threads
Thread Forum
BSOD Usually before or after the login screen
Hi, As the title says, sorry I don't have much more info to give. Please see attached zip file. Thank you in advance.
BSOD Help and Support
Blue Screen Shutdown Problem with Thinkpad...
Hi, I have been posting on the Lenovo forum with no success, so thought I might see if someone here can help me out... I have a new Lenovo T510 running Windows 7 Pro 64. When I close the lid, it should go into standby, but about 50% of the time, it will not shut down. If I just leave it...
BSOD Help and Support
Lenovo T60p Type 8745
I've got a Lenovo T60p Type 8745 laptop. It has a widescreen. When I installed Windows 7, it defaulted to 'Generic PnP Monitor on Standard VGA Graphics Adapter'. I can't seem to find the correct driver to move it to, and I dunno how to find which specific graphics card I have. The resolution...
Graphic Cards
Thinkpad T40 problems with Full screen Video
Hi there, I'm running Windows 7 Ultimate on a Thinkpad T40. I've tried two different sets of drivers, the Generic PnP drivers that Windows provides, and also finding a none WDDM driver for my specific chipset. Both times, Full screen video just becomes a mess of vertical lines flashing all over...
BSOD before login screen
Hello! I'm using Windows 7 64 bits. I've never had any problems on my computer until today. I installed the game Civilization 4, which isn't supposed to run perfectly on Windows 7... I runned it, and it shut down my whole computer. I tried it 3 or 4 times, then it became serious. I can...
BSOD Help and Support
Thinkpad fingerprint update messed with logon screen
I have a Lenovo Thinkpad T400 with Windows 7 professional 32-bit. Previously, my login screen would display a "fingerprint logon" option and my username concurrently. I just finished installing an update for the Lenovo fingerprint software using the Lenovo update utility, and now the logon screen...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App