Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD After SSD upgrade and Ram upgrade in Laptop. Mostly IRQL errors

05 Oct 2012   #1

Windows 7 Ultimate 64bit
BSOD After SSD upgrade and Ram upgrade in Laptop. Mostly IRQL errors

Like the title said, I'm getting random BSOD after upgrading to SSD and RAM.
Initially I thought it was the Intel Rapid Technology, because the system improved after I've installed. But now it still BSOD, but less frequent.

Here are my dump files and jcgriff2 files



Edit: Sorry I didn't put my CPU config, silly me.
Asus u46SV
Intel Core i5-2410M
2 x 4GB Corsair Value Select Ram (NEW+NEW)
GeForce GT 540M
OCZ Vertex 4 128GB firmware v1.5 (Latest+NEW)
My System SpecsSystem Spec
05 Oct 2012   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

  • Have you updated to the latest firmware for your SSD?

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner,
Backup tool, compatibility

Usual causes: Device driver, memory

Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Kaspersky does cause BSoDs. Please uninstall it and use Microsoft Security Essentials (at least to test)

Free up your start-up, keep nothing except the antivirus
Startup Programs - Change

Take memtest. Run for 4/5 passes
RAM - Test with Memtest86+

Run Disk Check for file system errors and bad sectors on it
Disk Check

Let us know the results
My System SpecsSystem Spec
05 Oct 2012   #3

Windows 7 Ultimate x64 Full Retail SP1

Did you replace an HDD with the SSD, or just add the SSD as the boot drive? Please take the time to fill in your system specs in the User CP. Knowing what hardware you have can be very helpful in troubleshooting
My System SpecsSystem Spec

05 Oct 2012   #4

Windows 7 Ultimate 64bit

A> Replaced Kaspersky with Windows Essentials, notice speedy improvement (less lag on startup)
B> Startup displays nothing, only desktop.ini
C> Disk Checks display no errors. So no fix were applied.
D> Had not done mem test, but did before a few weeks back that displayed some sector errors, probably 1 or 2. .

Will keep update on progress, also specs are on the first post. Thanks.
My System SpecsSystem Spec
05 Oct 2012   #5

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

OK. Do update the firmware for your SSD if you haven't already.
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
Unable to upgrade to Win 10 - no errors shown
I have been trying to upgrade my HP G62 Notebook PC for a week now. I get to 88% configuring and then the "shutting down" screen comes on. It then restarts in Win 7. I have followed all the steps to get ready for Win 10 upgrade but having no sucess. Thanks for any help.
Installation & Setup
Can't upgrade IE errors
Hey, I am having the exakt same problem but can't seem to find the file you uploaded in the onedrive! Would be very helpful if you could help me out since this is stopping me from getting win10 since I cant install IE11 Regards :) edit: sfc /scannow, gives no errors whatsoever...
Windows Updates & Activation
Windows Upgrade errors on compliance check
I have windows 7 enterprise x64 installed on my machine. I've been having troubles for a while. Many updates don't install, and device drivers won't install when a new device is plugged in (extremely annoying). I thought that I could do an in-place upgrade install and possibly fix the problem, but...
Installation & Setup
Trying to upgrade 7057 to 7600 - Errors re: x64 vs. x86
1st Post - nice forum y'all have here! :D I've been running 7057 since it became available and have been loving it. A few weeks back something happened to my install of 7057 and I lost a lot of setup info & preferences - I've gone back to various older restore points with no change, the OS...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:33.
Twitter Facebook