New
#1
BSOD's under different circumstances
hello,
My computer (intel icore-5, sandy bridge, motherboard: asrock z68 extreme4, 16gb ram gail, win7 full 64bit) is hanging or crashing to blue screen, and it happens under different circumstances.
It could happen while just simply browsing internet sites, or while working in 3d Max. So it is not strictly connected to the difficulty of the process when crash happens.
Sometimes the cursor of the mouse just stops, and not moving, and the computer hangs with the frozen picture on the monitor: no blue screens at all (and no info about crash after reboot either, and no minidump files in this case).
But sometimes it crashes to "classic" blue screen: with info, code etc. After that, it reboots, and reports about crash.
That was the info after reboot:
1 crash:
BCCode: d1
BCP1: 0000000000000008
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88001A371BB
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
2nd crash:
BCCode: 101
BCP1: 0000000000000031
BCP2: 0000000000000000
BCP3: FFFFF88003365180
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
I've heard that 101 code might be connected with C1E halt state in BIOS, also it could be due to the "intel speedstep" , I've tried to turn them off in BIOS, but after that there also was the same hanging. Any other ideas - what else might be the reason of that crashes?
Any advice would be appreciated!
PS: I attached minidumps about two last crashes... and other info collected by 7forums utility