BSoD SYSTEM_THREAD_EXCEPTION_NOT_HANDLED, 0x1000007e


  1. Posts : 86
    Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 64-bit
       #1

    BSoD SYSTEM_THREAD_EXCEPTION_NOT_HANDLED, 0x1000007e


    I have been getting BSoD for quite a few months now (started saving copies and the oldest is April of this year) .. and because of the often occurrence I have a shortcut to my install of "BlueScreenView" on my desktop.

    The latest BSoD read as:

    A problem has been detected and Windows has been shut down to prevent damage
    to your computer.

    The problem seems to be caused by the following file: amdppm.sys

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    If this is the first time you've seen this stop error screen,
    restart your computer. If this screen appears again, follow
    these steps:

    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any Windows updates you might need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select Safe Mode.

    Technical Information:

    *** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff88006e02f8a, 0xfffff88005fc3898,
    0xfffff88005fc30f0)

    *** amdppm.sys - Address 0xfffff88005fc3ad0 base at 0xfffff88003715000 DateStamp
    0x4a5bc0fd
    Caused by address: amdppm.sys+28aead0
    Crash address: amdppm.sys+36edf8a

    Previous BSoD:

    Sun Sep 30/12
    Caused By Driver : flpydisk.sys
    Caused By Address : flpydisk.sys+28e0ad0
    Crash Address : lvrs64.sys+2f8a

    Sat Sep 08/12
    Caused By Driver : lvrs64.sys
    Caused By Address : lvrs64.sys+1661
    Crash Address : lvrs64.sys+2f8a

    Wed Aug 29/12
    Caused By Driver : usbehci.sys
    Caused By Address : usbehci.sys+40c7ad0
    Crash Address : lvrs64.sys+2f8a


    I know that amdppm.sys is a AMD Processor driver but I have the most recent version of AMD Catalyst 12.6:

    Software:
    Driver Packaging Version: 8.97.100.3-120703a-145534C-ATI
    Catalyst Version: 12.6
    Direct3D Version: 7.14.10.0911
    OpenGL Version: 6.14.10.11653
    AMD VISION Engine Control Center Version: 2012.0704.122.388

    Hardware - Primary Adapter:
    Graphics Chipset: ATI Radeon HD 4850
    BIOS Version: 011.016.000.028 (No there is no newer version)
    Memory Size: 1024 MB
    Memory Type: GDDR3
    Core Clock in MHz: 625 MHz
    Memory Clock in MHz: 993 MHz

    Other:
    Display Max Resolution: 1920x1080
    Currently used: 1280x1024 32 Bpp @ 75 Hz (Color quality High (32-bit) Landscape)
    max refresh rate: 75Hz
    Display name: L1718S

    CPU Processor Speeds: 1200 MHz - 2300 MHz


    Typing this while waiting for the SF Diagnostic Tool to finish as it is taking a long time (with the "Grab All" option).

    Also I will also be burning a newer copy of Memtest to CD to check my memory but the last time I did there were no problems found.

    Para 1: The exception code that was not handled
    0xC0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation occurred
    I am not really experienced at diagnosing problems but I am not new to computers neither. I just know how to research better than solve the problems myself.
    Because the SF Diagnostic Tool scan is slowing down my computer and I don't want to lose all that I have posted thus far I am going to submit and hope that I can edit to add the required zip file of the scan results.

    Okay got it. Seems if you don't put this on your desktop it doesn't actually save it to your desktop but on what ever drive you put it on in the #:\Users\*name*\Desktop\SF_*DAY-MONTH-YEAR*
    Last edited by kabo0m; 16 Oct 2012 at 17:26.
      My Computer


  2. Posts : 138
    Windows 7 Enterprise x64, Windows 8 Enterprise x64
       #2

    Update your driver for you Logitech HD Webcam C510.

    These drivers are a bit old and could also need to be updated:
    Realtek PCIe GBE Family Controller
    fffff880`02c00000 fffff880`02c56000 Rt64win7 Wed Jun 23 11:10:45 2010 (4C21CF95)

    Realtek High Definition Audio
    fffff880`07239000 fffff880`073e5900 RTKVHD64 Fri May 22 20:04:20 2009 (4A16E924)

    Smart Card Reader?
    fffff880`07b8c000 fffff880`07b9ab80 MHIKEY10x64 Wed Sep 15 10:46:12 2010 (4C9087D4)
      My Computer


  3. Posts : 86
    Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 64-bit
    Thread Starter
       #3

    Tobias said:
    Update your driver for you Logitech HD Webcam C510.

    These drivers are a bit old and could also need to be updated:
    Realtek PCIe GBE Family Controller
    fffff880`02c00000 fffff880`02c56000 Rt64win7 Wed Jun 23 11:10:45 2010 (4C21CF95)

    Realtek High Definition Audio
    fffff880`07239000 fffff880`073e5900 RTKVHD64 Fri May 22 20:04:20 2009 (4A16E924)

    Smart Card Reader?
    fffff880`07b8c000 fffff880`07b9ab80 MHIKEY10x64 Wed Sep 15 10:46:12 2010 (4C9087D4)
    Last I checked there was no newer driver for the Logitech C510 HD Webcam but I just checked now and they FINALLY released a newer one. I am glad because it has been giving me trouble since I bought it this year.

    Also when it comes to drivers I seem to sometimes have a hard time knowing where to get them. I try to go to the main site but like in the case of the Realtek PCIe GBE Family Controller when I go to the main site the extra information I need to know in order to choose the right one I do not know: Realtek I don't know which one to choose. All I know is mine is Realtek PCIe GBE Family Controller - Adapter Type: Ethernet 802.3

    So is it safe to just grab this one? http://drivers.softpedia.com/get/NET...ws-7-x64.shtml

    For the Realtek High Definition Audio I am grabbing the 64bits Vista, Windows7, Windows8 Driver (exe) from Realtek

    Now with the Smart Card Reader I don't think I can find updated drivers for that. Hopefully updating these others will stop my blue screens. I will reboot after this and if I don't get another blue screen for 2 weeks then I will know the problem is solved and will post that here or of course if I continue to have problems I will be back here.
    Last edited by kabo0m; 17 Oct 2012 at 11:35.
      My Computer


  4. Posts : 86
    Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 64-bit
    Thread Starter
       #4

    Okay ran into issues with trying to install the Webcam driver ..

    I get this error (see image)

    I have 31 Gb free (11 % free) of a 300 Gb HDD

    Back after many reboots. I had multiposting so just editing my post to add more info:

    Couldn't install that as it said I either didn't have enough room or needed to run as administrator or that something else was already in the middle of installing or the file is damaged or I have to reboot.

    I have plenty of HDD space as 158 Mb install should have no problem on 31 Gb and I ran it as administrator and nothing else was installing as I tried after just rebooting a few times.

    So instead I decided to just uninstall the older version and see if that was why it wouldn't install. It said I had to reboot so I did. Then when Windows started back up it automatically installed it again I guess because it was there. I tried one last time to install but same error. So this time I gave up and just went through the webcam program itself and told it to update (the Logitech Updater screenshot attached). It would only update to Version 1.8.7259 however instead of the Version 2.51.828.0 that the file would have updated it to if it had worked. I have no idea why it won't and after all this I don't know what version it was that was causing the issues in the first place..
    Last edited by kabo0m; 17 Oct 2012 at 14:20. Reason: Added results after rebooting and trying again
      My Computer


  5. Posts : 138
    Windows 7 Enterprise x64, Windows 8 Enterprise x64
       #5

    kabo0m said:
    Also when it comes to drivers I seem to sometimes have a hard time knowing where to get them. I try to go to the main site but like in the case of the Realtek PCIe GBE Family Controller when I go to the main site the extra information I need to know in order to choose the right one I do not know: Realtek I don't know which one to choose. All I know is mine is Realtek PCIe GBE Family Controller - Adapter Type: Ethernet 802.3
    It looks like you have a RTL8168, download the driver from here.

    kabo0m said:
    Okay ran into issues with trying to install the Webcam driver
    Download Process Monitor and start it before running the installer (use CTRL+E to stop/start capturing) save the log file and upload it here, it might get quite big so you maybe have to start capturing just before the error appears.

    kabo0m said:
    So this time I gave up and just went through the webcam program itself and told it to update (the Logitech Updater screenshot attached). It would only update to Version 1.8.7259 however instead of the Version 2.51.828.0 that the file would have updated it to if it had worked. I have no idea why it won't and after all this I don't know what version it was that was causing the issues in the first place..
    Well, if you get any more BSODs after updating to version 1.8.7259 just upload the dumps here.
    Last edited by Tobias; 17 Oct 2012 at 14:45.
      My Computer


  6. Posts : 86
    Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 64-bit
    Thread Starter
       #6

    Just got another last night while talking via voice through the mic in the webcam (not using the webcam but just the mic to talk with a bunch of friends on Mumble). This was before I saw your last post.

    This embedded info from BlueScreenView:
    A problem has been detected and Windows has been shut down to prevent damage
    to your computer.

    The problem seems to be caused by the following file: SMCLIB.SYS

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    If this is the first time you've seen this stop error screen,
    restart your computer. If this screen appears again, follow
    these steps:

    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any Windows updates you might need.

    If problems continue, disable or remove any newly installed hardware
    or software. Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select Safe Mode.

    Technical Information:

    *** STOP: 0x1000007e (0xffffffffc0000005, 0xfffff8800735ef8a, 0xfffff880061cf898,
    0xfffff880061cf0f0)

    *** SMCLIB.SYS - Address 0xfffff880061cfad0 base at 0xfffff88002b9c000 DateStamp
    0x4a5bcaa3
    Code:
    ==================================================
    Dump File         : 101912-19749-01.dmp
    Crash Time        : Fri Oct 19/12 12:14:17 AM
    Bug Check String  : SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
    Bug Check Code    : 0x1000007e
    Parameter 1       : ffffffff`c0000005
    Parameter 2       : fffff880`0735ef8a
    Parameter 3       : fffff880`061cf898
    Parameter 4       : fffff880`061cf0f0
    Caused By Driver  : SMCLIB.SYS
    Caused By Address : SMCLIB.SYS+3633ad0
    File Description  : 
    Product Name      : 
    Company           : 
    File Version      : 
    Processor         : x64
    Crash Address     : HIDCLASS.SYS+98f8a
    Stack Address 1   : 
    Stack Address 2   : 
    Stack Address 3   : 
    Computer Name     : 
    Full Path         : C:\Windows\Minidump\101912-19749-01.dmp
    Processors Count  : 3
    Major Version     : 15
    Minor Version     : 7601
    Dump File Size    : 288,076
    ==================================================
    Attached the dump file: Kabo0m_BSOD_101912-.zip (29.3 KB)

    SF Diagnostic Tool: Kabo0m_19-10-2012.zip (1.62 MB)
      My Computer


  7. Posts : 138
    Windows 7 Enterprise x64, Windows 8 Enterprise x64
       #7

    Looks like the BSOD was caused by the webcam driver again and unfortunately it's still the same version both in the new and the old dump file. I would recommend that try to install version 2.51.828.0 again.

    Probably caused by : lvrs64.sys ( lvrs64+2f8a )
    fffff880`0735c000 fffff880`073afa80 lvrs64 Wed Jan 18 07:40:36 2012 (4F166964)
      My Computer


  8. Posts : 86
    Microsoft Windows 7 Professional Edition Service Pack 1 (build 7601), 64-bit
    Thread Starter
       #8

    Tobias said:
    Looks like the BSOD was caused by the webcam driver again and unfortunately it's still the same version both in the new and the old dump file. I would recommend that try to install version 2.51.828.0 again.

    Probably caused by : lvrs64.sys ( lvrs64+2f8a )
    fffff880`0735c000 fffff880`073afa80 lvrs64 Wed Jan 18 07:40:36 2012 (4F166964)
    I had trouble with that version but according to this list: Webcam software and driver support for Windows - Logitech FAQ it seems that 2.31 is compatible instead of 2.51.. ?? Am I reading that correctly?

    Also what does the date mean? Wed Jan 18 07:40:36 2012
    Last edited by kabo0m; 27 Oct 2012 at 15:26.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:21.
Find Us