Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD coming out of sleep or standby mode or just by setting down

16 Oct 2012   #1

Windows 7 Home Premium 64 bit
BSOD coming out of sleep or standby mode or just by setting down

So i have a new computer only bought a few months ago and ive gotten the BSOD several times coming out of standby mode or even if i just set it down any harder than a feather falling. Sometimes it happens sometimes its just fine, i have no idea what the problem is i just knw BSOD is bad... attached are all my crash reports please help this is only annoying as long as it isnt a serious threat to my files.

My System SpecsSystem Spec
17 Oct 2012   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit


Please upload your msinfo32.nfo file. To get this:
  • Click on the Start
  • Type msinfo32 into the Search programs and files box
  • When it opens, go to File, Save
  • Save as msinfo32.nfo and save in a place you will remember
  • Let it finish the process of gathering and saving the system info
  • Right click the .nfo file, click send to compressed (zipped) folder
  • Upload the .zip file here.

From one dump file I can say that your Synaptic Touch Pad Driver is causing BSoDs.
The other dumps are not that helpful. So please upload your msinfo file and look for possible driver update on the Synaptic Touch Pad Driver.

BugCheck D1, {fffffa7fd3d35bbc, 7, 0, fffff88003041a3b}

Unable to load image \SystemRoot\system32\DRIVERS\SynTP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
Probably caused by : SynTP.sys ( SynTP+3a3b )

Followup: MachineOwner

0: kd> lmvm SynTP
start             end                 module name
fffff880`0303e000 fffff880`031a6000   SynTP    T (no symbols)           
    Loaded symbol image file: SynTP.sys
    Image path: \SystemRoot\system32\DRIVERS\SynTP.sys
    Image name: SynTP.sys
    Timestamp:        Sat Jul 16 03:44:41 2011 (4E20B4C9)
    CheckSum:         0016C462
    ImageSize:        00168000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Drivers | Synaptics | Driver Reference Table

Usual causes:  Memory corruption, Hardware (memory in particular), 
Overclocking failure, Installing a faulty or mismatched hardware 
(especially memory) or a failure after installing it, 3rd party firewall, 
Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards,
Incompatible storage devices, Overclocking, Virus scanner, Backup tool, 
Bad motherboard, Missing Service Pack
BugCheck 7F, {8, 80050033, 406f8, fffff800032cebdc}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
Usual causes:  Device driver
BugCheck FC, {fffff8800a6faae0, 800000008fc8c963, fffff8800a6fa800, 2}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4534c )
Usual causes:  Defective hardware (particularly memory - but not just RAM), 
Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
BugCheck 50, {fffff6fc51ffc510, 0, fffff800032a507d, 2}
Probably caused by : memory_corruption ( nt!MiMakeProtoAddressValid+4d )
My System SpecsSystem Spec
17 Oct 2012   #3

Windows 7 Home Premium 64 bit

Here is my msinfo32 file
My System SpecsSystem Spec

17 Oct 2012   #4

Windows 7 Home Premium 64 bit

PS there was a touch pad update which i am dowloading currently
My System SpecsSystem Spec
17 Oct 2012   #5

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Okay, no problematic software.

You may want to update to the latest drivers for your onboard VGA,
Driver	c:\windows\system32\drivers\igdkmd64.sys (, 11.72 MB (12,288,480 bytes), 7/27/2011 10:22 AM)
You'll get it from here:
Additional suggestions:
Run the System File Checker that scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Run Disk Check on your hard disk for file system errors and bad sectors on it:
Keep us posted
My System SpecsSystem Spec

 BSOD coming out of sleep or standby mode or just by setting down

Thread Tools

Similar help and support threads
Thread Forum
BSOD when coming out of sleep mode.
When coming out of sleep mode the log in screen starts to come on and I get a loud buzzing from the hard drive then I get the blue screen this has happened 3 times this week. I do not have anything new. win 7 64bit updated intel 2.66ghz
BSOD Help and Support
BSOD When coming out of sleep mode.
Hi there, have recently been suffering with BSOD errors when coming out of sleep mode, I think. Have also attached my minidump file. Any help would be much appreciated! Am usually alright with computers, although anything BSOD puts me into a state of shock! :D EDIT - Apologies,...
BSOD Help and Support
doc and xls Files Open Very Slowly after Coming out of Standby Mode
My Dell XPS M1530 laptop is running Win7 64-bit edition. After bringing the laptop out of standby (or Hibernate), it takes very long (up to 60 seconds) to open a simple doc or xls file. No issue opening pdf files. I am using Office 2003. If I log off and then log back into the desktop, the...
Microsoft Office
BSOD after coming out of sleep mode
I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.
BSOD Help and Support
BSoD - while coming out of sleep mode?
Hi All Please find attached the dump report and perfmon report. I have experienced BSoD the past 4 days (3 times) all times it happened while coming out of sleep mode, but it does not happen all times the PC goes to sleep. It's a new laptop, Windows 7 pro 32-bit, I had it since Jan...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:55.
Twitter Facebook Google+