BSOD CI.dll - The driver probably at fault is hardware_disk

Looks like the long generic test failed. Doesn't tell me much other then it failed... found a bad sector? I can't seem to locate an error code in the log. I had a lot running in Windows at the time of the test; I will run the test in the bootable DOS version - see if it repairs/passes.

Code:

 
--------------- SeaTools for Windows v1.2.0.6 ---------------
10/17/2012 1:12:44 PM
Model: WDC WD1002FAEX-007BA0
Serial Number: WD-WMAY00737463
Firmware Revision: 05.01D05
Short Generic - Started 10/17/2012 1:12:44 PM
Short Generic - Started 10/17/2012 1:12:45 PM
Short Generic - Pass 10/17/2012 1:15:54 PM
Short Generic - Pass 10/17/2012 1:16:12 PM
Long Generic - Started 10/17/2012 1:17:20 PM
Long Generic - Started 10/17/2012 1:17:20 PM
Long Generic - FAIL 10/17/2012 1:38:15 PM
Long Generic - FAIL 10/17/2012 1:38:15 PM

Yup.. Possible. What's the age of the hard drive?

shawnpederson said:

I have only been using it for maybe a little over a year. I ran some more HDD tests, they all came back fine. After a few more BSOD, I am now doing a clean format.

Good luck