Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Keeps Happening Every Night.

24 Oct 2012   #11

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Well, here is your crash report.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa80cbc8dc98, 0, fffff80002c51b3b, 5}

Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )

Followup: MachineOwner

7: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffffa80cbc8dc98, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002c51b3b, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000005, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eb1100

fffff800`02c51b3b 488b4128        mov     rax,qword ptr [rcx+28h]





PROCESS_NAME:  minirosetta_gr


TRAP_FRAME:  fffff8800ce3ecf0 -- (.trap 0xfffff8800ce3ecf0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000058000000000 rbx=0000000000000000 rcx=fffffa80cbc8dc70
rdx=0000000003279009 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c51b3b rsp=fffff8800ce3ee80 rbp=fffff7000108de80
 r8=fffffa8012ba6768  r9=0000000000000000 r10=0000000000000d9c
r11=fffff70001080000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
fffff800`02c51b3b 488b4128        mov     rax,qword ptr [rcx+28h] ds:fffffa80`cbc8dc98=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002c288af to fffff80002c81fc0

fffff880`0ce3eb88 fffff800`02c288af : 00000000`00000050 fffffa80`cbc8dc98 00000000`00000000 fffff880`0ce3ecf0 : nt!KeBugCheckEx
fffff880`0ce3eb90 fffff800`02c800ee : 00000000`00000000 fffffa80`cbc8dc98 000f01ff`00020000 b3f00043`ed9ed867 : nt! ?? ::FNODOBFM::`string'+0x437c1
fffff880`0ce3ecf0 fffff800`02c51b3b : fffffa80`0cac50a8 fffff880`0ce3ef00 fffff880`0ce3f3b8 00000000`00000000 : nt!KiPageFault+0x16e
fffff880`0ce3ee80 fffff800`02c52c9e : fffffa80`12ba63d0 fffffa80`00000008 fffff880`00000d9c fffff800`00000000 : nt!MiDeleteAddressesInWorkingSet+0x27f
fffff880`0ce3f730 fffff800`02f5365a : fffff8a0`160af060 fffff880`0ce3fae0 00000000`00000000 fffffa80`139da060 : nt!MmCleanProcessAddressSpace+0x96
fffff880`0ce3f780 fffff800`02f36b7d : 00000000`00000000 00000000`00000001 00000000`7efd8000 fffffa80`12b98b50 : nt!PspExitThread+0x56a
fffff880`0ce3f880 fffff800`02c74b3a : 00000000`00000000 00000000`00000000 00000000`00000000 fffff800`02c7d810 : nt!PsExitSpecialApc+0x1d
fffff880`0ce3f8b0 fffff800`02c74e80 : 00000000`00000246 fffff880`0ce3f930 fffff800`02f36af0 00000000`00000001 : nt!KiDeliverApc+0x2ca
fffff880`0ce3f930 fffff800`02c812f7 : 00000000`00000000 fffff800`02f666ac fffff880`0ce3fb60 00000000`00000000 : nt!KiInitiateUserApc+0x70
fffff880`0ce3fa70 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceExit+0x9c


fffff800`02c51b3b 488b4128        mov     rax,qword ptr [rcx+28h]


SYMBOL_NAME:  nt!MiDeleteAddressesInWorkingSet+27f

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0x50_nt!MiDeleteAddressesInWorkingSet+27f

BUCKET_ID:  X64_0x50_nt!MiDeleteAddressesInWorkingSet+27f

Followup: MachineOwner
According to, STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:
Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

► For Memory,
RAM - Test with Memtest86+
Run it, for at least eight passes, preferably overnight.

► For Faulty sysem service.
SFC /SCANNOW Command - System File Checker

► For Antivirus,
Uninstall MSE.
How to manually uninstall Microsoft Security Essentials 1.0.1963 if you cannot uninstall it by using the Add or Remove Programs item
Then reinstall it again, and all the updates.

► For Device Driver,
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

► For NTFS corruption,
  1. Update your SSD,s firmware.
  2. Re-seat the sata and power.
  3. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  4. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
► You may leave the BIOS alone, IMHO.
BIOS Version/Date    American Megatrends Inc. P1.30, 7/13/2012
Do these and let us know the results :)

My System SpecsSystem Spec
24 Oct 2012   #12

Windows 7 Professional x64

This is a new system build I did myself. After putting it together, the first thing I did even before installing Windows was to run Memtest 86+. I ran it for over 24 hours and it did not find any errors.

I haven't run chkdsk c:/f/r since I finished installing all of my software and I ran chkdsk on all three of my drives (C, D, and E). It didn't show any major issues. Just something about repairing a USN Journal. I still have to try SFC /Scannow.

My only antivirus is Microsoft Security Essentials and I just installed it a few days ago along with all of the latest updates for it through Windows Update.

My SSDs all have the latest firmware and I even ran HDDErase (their internal secure erase command) on each one of them before installing Windows.

I still have to try Driver Verifier.
My System SpecsSystem Spec
24 Oct 2012   #13

Windows 7 Professional x64

Oh, I also disabled the page file on C and created a static 2GB page file on a separate SSD (my E drive). Would that cause any issues?
My System SpecsSystem Spec

24 Oct 2012   #14

Windows 7 ultimate x64


Please use the SF diagnostic tool to post all the files in one shot.

Then use this to update your system profile..
My System SpecsSystem Spec
25 Oct 2012   #15

Windows 7 Professional x64

Ok, I've filled in my info. from the System Info. tool and have attached everything from the SF diagnostic tool.

Driver Verifier has also been running for around 24 hours now. Was something supposed to happen with that?
My System SpecsSystem Spec
25 Oct 2012   #16
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit

First verify (punny) that Driver Verifier is indeed active. You can do this by either going to command line and typing verifier /query and it'll give list of drivers being verified and checks that are on. Or you can go back into Driver Verifier GUI as you did to set it up, but instead select the option "Display existing settings". If you do not see a list of drivers at least, then Driver Verifier is not on.

If you've determined DV is in fact on, keep it on. Use your computer normally, or if there's anything you know that will specifically BSOD your system, do that, and let it BSOD. Any crashes that occur should provide more accurate crashdumps when DV is active, which we can use to better ascertain cause.

Btw, I notice you don't have any dump files in the latest zip. It's preferred that you go to the C:/Windows/Minidump directory and stuff a zip file full of em and send it over. If you do not see any dump files at all, then you probably are using some system cleaner app like CCleaner. It is advised you do not use these applications in the future, especially since we are troubleshooting your BSODs right now and they love to prune diagnostic files like these crashdumps.
My System SpecsSystem Spec
25 Oct 2012   #17

Windows 7 Professional x64

Yes, it looks like Driver Verifier is active. I do use CCleaner. Didn't know that it erases the dump files. That's why there are no dump files in the file?
My System SpecsSystem Spec
25 Oct 2012   #18
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit

Correct. Let your system crash a couple more times with DV on and provide the crashdumps for those.
My System SpecsSystem Spec
31 Oct 2012   #19

Windows 7 Professional x64

Strange... Ever since I turned on Driver Verifier, I haven't had any BSODs. It's been on now for 5 days.

It has slowed my system down a little though. Takes longer for it to fully startup.
My System SpecsSystem Spec
31 Oct 2012   #20
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit

That's typical, as drivers have to fulfill extra checks when doing stuff.

Try turning DV off and then test again in normal environment. If it destabilizes, then perhaps we're looking at what's called a race condition, where two threads are competing for some resource and while usually one happens to mess with something at the wrong time, having DV in place slowed it down enough to put it in check. That's just speculation though.
My System SpecsSystem Spec

 BSOD Keeps Happening Every Night.

Thread Tools

Similar help and support threads
Thread Forum
BSOD been happening occasionally for months now happening frequently
For months ive been getting BSOD randomly. I upgraded my GPU last week and everything was running great. While updating R6 i got a BSOD and it occured 8 times or so in that hour. When it happened before it would only be once. Minidump files have only been saved twice in the past year and its...
BSOD Help and Support
BSOD happens randomly every night
Hi I've been getting a BSOD for about a month now and have tried running all the diagnostic tools and they come up with nothing, I even went as far as buying a new hard drive yesterday and doing a fresh install of windows and i have just done all the updates and downloaded my motherboard and...
BSOD Help and Support
BSOD almost every night...
I need to let my PC on at night (to run some applications) and almost every morning (even during the day sometimes) i found it with a BSOD reporting a "driver power state failure" error. I would be very grateful for any help (in the file attached are the outputs of the "BSOD Dump & System File...
BSOD Help and Support
System crash at night every other night past 2 weeks
Not EXACTLY every other night, but it seems that way. This is my office machine, Dell Studio XPS 8100, purchased October 2010: - Win7 x64 Pro - Core i7 Quad 870 2.93 GHz - 12 GB DDR3 SDRAM - ATI Radeon HD 5770 1GB This is in an office with a Server 2003 machine as the domain controller,...
BSOD Help and Support
BSOD every other night
Hi Guys, every two days my computer at night goes ba-bye... I've attached the dump, can you have a look-see ? Thanks.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:13.
Twitter Facebook Google+