New
#21
@F5ing,
Alight, I will do as you say :)
And thanks for having for having a look!
<3
-J
@F5ing,
Alight, I will do as you say :)
And thanks for having for having a look!
<3
-J
Request system information:
Please run Speccy, let it gather all the information, and PUBLISH (file menu publish) the report
Speccy will place the report on the Piriform server and give you the URL to use as a reference.
Sensitive information is removed before Speccy places the report on the server.
Then post a link to the report.
If you choose to save the report and post it here, you'll have to edit it and remove sensitive stuff yourself, particularly your Win7 key - remove it by hand or use the publish option (preferred).
Don't just blast the whole report into a post, wrap it in a "code box" using the # icon on the post menu.
But why bother with all of that - use the Speccy publish option.
Bill
.
@Britton30,
I went to the samsung website and did what you said but I cant find my HD on there My Model number is: hd154ui
Also that link dose not work for ESTOOL301v.iso I get this error "Page not found! (errorCode:404)"
@Slartybart,
Here you are!
http://speccy.piriform.com/results/c...rz7vUT80YPlCia
Update:
I did more of a memtest+ This time I left it running as I was away "5 hours ish"
Pass: 6 Errors: 0
-J
<3
Ahh, I have just discovered Samsung HDD support has been transferred to Seagate.
Start here.
http://www.seagate.com/support/inter...p-hard-drives/ I don't see in your images what Spinpoint series it is.
So I must ask.. For everyone who has helped me so far, What do you think is wrong with my PC?
-J
<3
If you haven't started the reinstall with disk wipe, I'd also reset the BIOS to defaults first: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS.
Then set SATA controller to AHCI, look for a setting to enable SMART status.
@gregrocker,
I will be doing a fresh install just backing up my stuff. I could not find a "SATA controller to AHCI" and I did Clear the CMOS with the "Factory Defaults" BIOS Option Menu.
@F5ing,
Here you are some images *Before I used Factory Defaults*
The start:
gregrocker/F5ing This was the only smart thing I could find?:
I thought ACCI would be here:
Here is what I done.. I set everything to Factory Defaults, I then turned HDD S.M.A.R.T to enabled and saved and quit.