BSOD using OUTLOOK or IDLE, error 101


  1. Posts : 7
    New York
       #1

    BSOD using OUTLOOK or IDLE, error 101


    reformatted not long ago due to frequent BSOD but now its happening again =/

    laptop is about one year old please help!

    "Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 101
    BCP1: 0000000000000019
    BCP2: 0000000000000000
    BCP3: FFFFF880009B2180
    BCP4: 0000000000000004
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1"

    much appreciated!!
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Try what's mentioned on this thread: STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
    Last edited by koolkat77; 28 Nov 2012 at 10:27. Reason: typo :O
      My Computer


  3. Posts : 7
    New York
    Thread Starter
       #3

    thank you, finally resolved it haha
      My Computer


  4. Posts : 15,026
    Windows 10 Home 64Bit
       #4

    Thanks for the letting us know.

    Posting what you did may be helpful to users suffering the same issue :)
      My Computer


  5. Posts : 7
    New York
    Thread Starter
       #5

    I ran the disk verifier to find the faulty driver which in my case was:
    Daemon tools - dtsoftbus01.sys

    it took system restore to get back into windows to disable the verifier but all is well now, thank you!
      My Computer


  6. Posts : 15,026
    Windows 10 Home 64Bit
       #6

    I see, let us know if there are any other issues.

    BTW, use either MSE or AVG. Two antiviruses may conflict. (Recommend MSE from a BSOD perspective)

    You may want to update the following drivers:
    Code:
    0: kd> lmvm rtl8192Ce
    start             end                 module name
    fffff880`0788d000 fffff880`079f8000   rtl8192Ce T (no symbols)           
        Loaded symbol image file: rtl8192Ce.sys
        Image path: rtl8192Ce.sys
        Image name: rtl8192Ce.sys
        Timestamp:        Fri Dec 03 16:56:21 2010 (4CF8CCD5)
        CheckSum:         00118EED
        ImageSize:        0016B000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    ...................................................................
    0: kd> lmvm nusb3hub
    start             end                 module name
    fffff880`07cb7000 fffff880`07cd0000   nusb3hub T (no symbols)           
        Loaded symbol image file: nusb3hub.sys
        Image path: nusb3hub.sys
        Image name: nusb3hub.sys
        Timestamp:        Fri Nov 19 07:34:24 2010 (4CE5D420)
        CheckSum:         00016001
        ImageSize:        00019000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    How to Clean Left Over Driver Files with Driver Sweeper

    rtl8192Ce.sys : Driver Reference Table
    nusb3hub.sys : Driver Reference Table

    Update to SP-1:

    Good luck.
      My Computer


  7. Posts : 7
    New York
    Thread Starter
       #7

    last question would be how do i manually update those drivers??
      My Computer


  8. Posts : 15,026
    Windows 10 Home 64Bit
       #8

    From device manager.

    Upgrading drivers for pre-existing device:
    1. Open Driver Install - Device Manager
    2. In the Device Manager locate the device you wish to update the drivers for/look for a
    3. Right-click the device and click Properties.
    4. In the Properties window click the Driver tab.
    5. Click the Update Driver button.
    6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive

    Once drivers have been installed reboot.
      My Computer


  9. Posts : 7
    New York
    Thread Starter
       #9

    thank you so much!

    for the driver sweeper can i just select all and analyze and clean? because i dont see daemon tools or dt tools on the list
      My Computer


  10. Posts : 15,026
    Windows 10 Home 64Bit
       #10

    You would have to reinstall all those drivers then.

    Find drivers: Drivers and Downloads
    - search Google for the name of the driver
    - compare the Google results with what's installed on your system to figure out which device/program it belongs to
    - visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
    - if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

    - - The most common drivers are listed on this page: Driver Reference
    - - Driver manufacturer links are on this page: Drivers and Downloads
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:10.
Find Us