BSOD uninstalling program, 0x0000007a

Hi,

On my Netbook I've just had the KERNEL_DATA_INPAGE_ERROR bluescreen.

I've checked my drivers and made sure their updated, but it still gives me the error.

Please help

I can still get into normal windows mode aswell as safe mode

The program is Epson Download Manager

Thanks, any helps appreciated..

Welcome to SevenForums

Please upload the dump files following: https://www.sevenforums.com/crashes-d...tructions.html

From the usual causes of the bugcheck it can be Memory... Paging file corruption.... File system.... Hard drive.... Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, or a Missing Service Pack.

Did you run as administrator?

Run these tools and delete anything they find:

• Anti-rootkit utility TDSSKiller

ESET online scanner:

• Free Online Virus Scanner | ESET

Make full scans with MSE and MBAM.

• Microsoft Security Essentials - Free Antivirus for Windows
• Malwarebytes - The Free version
• Good and Free system security combination.

Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

And take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• RAM - Test with Memtest86+
• Guide to using Memtest86+ - Geeks to Go Forums

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.