Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD & Random Crashing - locale id: 1033

29 Nov 2012   #1

Windows 7 Pro
BSOD & Random Crashing - locale id: 1033

I'm working a friend's laptop (Windows 7 Home SP1) and it's randomly crashing, sometimes displaying BSOD. If I boot into Safe Mode, it doesn't have any issues but when it's not in Safe Mode, it crashes within the first 10 minutes of booting to the desktop. Below is the error report it generated and I've attached the results of the tool.

problem event name: bluescreen
os version: 6.1.7601.
locale id: 1033
additional information about the problem:
bccode: 3b
bcp1: 00000000c0000005
bcp2: fffff8000309cd6c
bcp3: fffff880092d6c00
bcp4: 0000000000000000
os version: 6_1_7601
service pack: 1_0
product: 768_1

My System SpecsSystem Spec
29 Nov 2012   #2

Microsoft Community Contributor Award Recipient


Hello vipes27 and welcome to Seven Forums.

The latest dump file you posted shows a problem with an outdated SCSI CD-ROM driver and a Stop Error 0x01E. The driver is usually updated through Windows Update and Microsoft has a hotfix for the error code.

"0x0000001E" Stop error occurs intermittently in Windows 7 SP1 and Windows Server 2008 R2 SP1

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Arg1: ffffffffc0000096, The exception code that was not handled
Arg2: fffff800030bd16a, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000096 - {EXCEPTION}  Privileged instruction.

fffff800`030bd16a 0f22d8          mov     cr3,rax

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  0000000000000000

ERROR_CODE: (NTSTATUS) 0xc0000096 - {EXCEPTION}  Privileged instruction.

BUGCHECK_STR:  0x1E_c0000096




LAST_CONTROL_TRANSFER:  from fffff800030d7a88 to fffff8000308cfc0

fffff880`0667bee8 fffff800`030d7a88 : 00000000`0000001e ffffffff`c0000096 fffff800`030bd16a 00000000`00000000 : nt!KeBugCheckEx
fffff880`0667bef0 fffff800`0308c642 : fffff880`0667c6c8 fffffa80`09190710 fffff880`0667c770 fffffa80`09230170 : nt! ?? ::FNODOBFM::`string'+0x487ad
fffff880`0667c590 fffff800`0308af4a : fffff880`0667c7b0 fffff8a0`03378a60 00000000`00000039 00000000`00000000 : nt!KiExceptionDispatch+0xc2
fffff880`0667c770 fffff800`030bd16a : 00000000`00000000 fffffa80`09190710 fffffa80`09190710 fffff800`0335b8e3 : nt!KiGeneralProtectionFault+0x10a
fffff880`0667c900 fffffa80`073859c8 : fffff880`0667ca80 fffff880`04432a00 00000000`fffffa80 00000000`00000000 : nt!KeStackAttachProcess+0x1ba
fffff880`0667c980 fffff880`0667ca80 : fffff880`04432a00 00000000`fffffa80 00000000`00000000 00000000`00000001 : 0xfffffa80`073859c8
fffff880`0667c988 fffff880`04432a00 : 00000000`fffffa80 00000000`00000000 00000000`00000001 00000000`002d0940 : 0xfffff880`0667ca80
fffff880`0667c990 fffff880`0442a503 : fffffa80`07b12550 00000000`00000000 0000057f`f84edaa8 00000000`00000000 : cdrom!RequestSetupMcnRequest+0x6c
fffff880`0667ca30 fffffa80`09190710 : fffffa80`00000008 ffffffff`80001164 00000000`00000fc4 00000000`00000000 : cdrom!RequestProcessSerializedIoctl+0xcdb
fffff880`0667cb10 fffffa80`00000008 : ffffffff`80001164 00000000`00000fc4 00000000`00000000 fffffa80`00000030 : 0xfffffa80`09190710
fffff880`0667cb18 ffffffff`80001164 : 00000000`00000fc4 00000000`00000000 fffffa80`00000030 00000000`00000000 : 0xfffffa80`00000008
fffff880`0667cb20 00000000`00000fc4 : 00000000`00000000 fffffa80`00000030 00000000`00000000 00000000`00000000 : 0xffffffff`80001164
fffff880`0667cb28 00000000`00000000 : fffffa80`00000030 00000000`00000000 00000000`00000000 00000000`00000200 : 0xfc4


fffff880`04432a00 50              push    rax


SYMBOL_NAME:  cdrom!RequestSetupMcnRequest+6c

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  cdrom.sys


FAILURE_BUCKET_ID:  X64_0x1E_c0000096_cdrom!RequestSetupMcnRequest+6c

BUCKET_ID:  X64_0x1E_c0000096_cdrom!RequestSetupMcnRequest+6c

Followup: MachineOwner

Loaded symbol image file: cdrom.sys
    Mapped memory image file: c:\symcache\cdrom.sys\4CE792982a000\cdrom.sys
    Image path: \SystemRoot\system32\DRIVERS\cdrom.sys
    Image name: cdrom.sys
    Timestamp:        Sat Nov 20 03:19:20 2010 (4CE79298)
    CheckSum:         0002B742
    ImageSize:        0002A000
    File version:     6.1.7601.17514
    Product version:  6.1.7601.17514
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0000.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     cdrom.sys
    OriginalFilename: cdrom.sys
    ProductVersion:   6.1.7601.17514
    FileVersion:      6.1.7601.17514 (win7sp1_rtm.101119-1850)
    FileDescription:  SCSI CD-ROM Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
The earliest dump file shows a problem with the ntkrnlmp.exe driver (which is associated with the ntoskrnl.exe driver), and a Stop Error code 0x0A. The nt drivers are usually updated through Windows Update and the 0x0A Stop Error code indicates drivers are using improper memory addresses. This Microsoft TechNet article give some suggestions on how to handle this error.

Troubleshooting specific Stop messages

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck A, {7feff302, 2, 1, fffff8000310b0c5}

Probably caused by : ntkrnlmp.exe ( nt!KeStackAttachProcess+115 )

Followup: MachineOwner
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: 000000007feff302, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000310b0c5, address which referenced memory

Debugging Details:

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8000330a100


fffff800`0310b0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax





TRAP_FRAME:  fffff880035c4770 -- (.trap 0xfffff880035c4770)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000008 rbx=0000000000000000 rcx=fffffa8003cd50a0
rdx=fffff880035c4a58 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000310b0c5 rsp=fffff880035c4900 rbp=fffff880035c4a58
 r8=fffffa8003cd5090  r9=0000000000000130 r10=fffff880033660c0
r11=fffffa8003cd5040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
fffff800`0310b0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax ds:0e80:00000000`000000dc=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff800030da569 to fffff800030dafc0

fffff880`035c4628 fffff800`030da569 : 00000000`0000000a 00000000`7feff302 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`035c4630 fffff800`030d91e0 : fffff880`035c47b0 fffff8a0`0b600e80 00000000`00000039 fffffa80`03cd5040 : nt!KiBugCheckDispatch+0x69
fffff880`035c4770 fffff800`0310b0c5 : 00000000`00000000 fffffa80`03cd5040 fffffa80`03cd5040 fffff800`033a98e3 : nt!KiPageFault+0x260
fffff880`035c4900 fffffa80`073319c8 : fffff880`035c4a80 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KeStackAttachProcess+0x115
fffff880`035c4980 fffff880`035c4a80 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`073319c8
fffff880`035c4988 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff880`035c4a80


fffff800`0310b0c5 f00fc186dc000000 lock xadd dword ptr [rsi+0DCh],eax


SYMBOL_NAME:  nt!KeStackAttachProcess+115

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0xA_nt!KeStackAttachProcess+115

BUCKET_ID:  X64_0xA_nt!KeStackAttachProcess+115

Followup: MachineOwner
I'd also suggest running a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot the computer after each scan.

SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
29 Nov 2012   #3

Windows 7 Pro

I appreciate the reply.

I've downloaded the hotfix and I'm trying to install it but it won't allow me to install it in Safe Mode. When I try running it in normal mode, it crashes before I can get it installed. The same thing applies with running Windows Update.

I've also ran the system file checker a couple of times but that hasn't resolved it either. Any other ideas.

Thanks again for your help.
My System SpecsSystem Spec

30 Nov 2012   #4

Microsoft Community Contributor Award Recipient


Sometimes a computer has too many things going wrong at the same time and the quickest solution is to jump right into a repair install. A repair install should fix the currently installed Windows 7 and preserve user accounts, data, programs, system drivers etc.

Repair Install

It does require the installation media for the version of Windows 7 installed on the machine as well as the 25-digit Product Key for reactivation with Microsoft. If you don't have the installation media, you can download an ISO from Digital River (official Microsoft download site.) Save it to desktop and then burn it to DVD. A lot of folks recommend using the free ImgBurn and burning at no more than 4x speed.

Official Windows 7 SP1 ISO from Digital River « My Digital Life

The Official ImgBurn Website
My System SpecsSystem Spec
30 Nov 2012   #5

Windows 7 Pro

Can the repair install be run in Safe Mode? I don't think the laptop will stay up long enough if I'm not in Safe Mode.
My System SpecsSystem Spec
30 Nov 2012   #6

Microsoft Community Contributor Award Recipient


I'm sorry, no. You cannot do a repair install at boot or in safe mode.

Providing you're not dealing with a hardware issue (failing hard drive, RAM, etc) a clean install may be the best option. You might want to go through these troubleshooting steps prepared by one of the Forum experts. It has some suggestions on how to test for hardware issues. And a review of the clean install procedures.

Troubleshooting Steps for Windows 7

Clean Reinstall - Factory OEM Windows 7

Clean Install Windows 7
My System SpecsSystem Spec

 BSOD & Random Crashing - locale id: 1033

Thread Tools

Similar help and support threads
Thread Forum
Random Freezes and crashes. Locale ID: 1033 BCCOde: 1a
Ever since I got my new solid state hard drive I've been getting random crashes and freezing (automatically restarts after freezing). Most of the crashes occur when I am using google chrome. I had it crash when playing a game and using skype only once (never occurred again so far). Here is the...
BSOD Help and Support
Constant random BSOD's Locale ID: 1033
Hi everyone. I was wondering whether anyone could help me in diagnosing the cause of an ongoing issue I have been having with random BSOD's when performing everyday tasks on my PC. Here is the information I received upon startup: Problem signature: Problem Event Name: BlueScreen OS...
BSOD Help and Support
BSOD at Random times. Locale ID 1033 BCCode 3B
First let me start off with saying good afternoon to the members of the seven forums, today i'm here to ask you for some advice and help regarding my custom built gaming computer. Up until a few weeks ago my computer was running perfectly then all of a sudden the screen started flickering while...
BSOD Help and Support
Random BSOD, Locale ID 1033
Hi, I am new to the forums, but I have read quite a few of the threads and seen genuine solutions to Windows 7 problems, and I am hoping that someone may be able to help me. Essentially, I am experiencing random BSODs, occuring on average about 3 to 4 times a day and when I am conducting...
BSOD Help and Support
Random freezing when on internet. Locale ID: 1033
So lately I've been getting these random freezes. You can't do anything once it happens. It mainly only happens when on the internet. Not on games or audio applications or anything like that. I attached the last minidump of when it happened.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:21.
Twitter Facebook