New
#1
BSOD different codes caused by ntkrnlmp.exe
Hello
I have a
Mother Board: M4A88T-V evo/usb (I have checked the capacitors the board looks fine)
Raid Max RX-730SS power supply 720 W (Haven't had any problems however if I try to connect a third HDD with my blue ray, ssd and first HDD my computer wont start)
Main Hardrive Samsung 120 Gig SSD 830 series (This is my third SSD my two other OCZ SSD's died)
Hard Drive One: 1Tb Seagate Baracuda
Hard Drive Two:2 Tb Seagate Baracuda MD001-1CH164
CPU: AMD|PH II X6 1090T 3.2G AM3 RT
RAM:MEM 2Gx2|CORSAIR CMX4GX3M2B2000C9 R
Self build two years ago
I started getting BSOD about a month ago. I thought nothing of a few but then they became more frequent. Eventually my computer was crashing regularly to the point I would be doing work and it was crashing time and time again in a 24 hr period. I noticed that after it crashed I would need to either repair boot or or boot into safe mode before it would boot normally again. But even at that it almost always crashed within a hour or two.
I ran memtest 64+ for 8 passes
and windows memory diagnostic without a single error
I uninstalled avast but nothing changed.
Eventually I reinstalled windows and everything was running fine until I installed skype.
So I uninstalled skype but needed windows fix to do it as I couldn't uninstall without running the fix. The blue screens were not as frequent and generaly I can boot into windows directly after I have one now. But when I run windows debugger it points to ntkrnlmp.exe .This was one of the errors I was getting before but I was getting many more different error codes now this seems to be the one coming up.
I generaly haven't been having as many problems then I ran chkdsk on my hard drive (not the one I am running OS from) at 20% it crashed twice so I ran defrag and it went through the whole process without crashing. Then I ran sfc/scannow and at a certain point in the beggining it crashed. I bought a new hard drive disconnected my old one and ran sfc/scanow again it went for longer but then crashed again.
I am at the end of my rope I am in finals and have a lab report due.
Thanks in Advance I really don't know what else to do.
I have uploaded all recent minidumps after the windows install.
Thanks
Ryan