3b win32k BSOD from hardware upgrades

Hi.
I've been getting pretty constant BSOD's since I upgraded my mobo, CPU, and GPU. (ASUS to Gigabyte, Intel to AMD, AMD to AMD; respectively)
I've been slowly fixing it with my limited knowledge and Google, and they've lessened somewhat. I've basically just been upgrading drivers and trying to get rid of the old ones.
The biggest change so far has been from yesterday, when I completely uninstalled all AMD components, folders, and registry entries. I then reinstalled with all the newest AMD drivers (chipset too of course). No BSOD's for the rest of the evening yesterday, and none for a few hours this morning, until the newest (which you will see as the only entry for today).

Hoping to finally get this fixed and dealt with once and for all.
Please let me know what I need to do.
Thanks.

Edit: More BSOD's. New one saying it caught a device driver attempting to corrupt the system. I can't recall the stop code now, and I'm on my laptop now so I can't access the minidump for it. The computer also crashed with another 3b win32k 10 minutes after the new one.
I'll go on the computer and add the minidump when someone tries helping. Thanks.

Welcome to SevenForums :)

Did you perform a clean install after installing so many new hardware?

Is the firmware for your SSD up to date?

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• RAM - Test with Memtest86+

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

Errors are sometimes found after 8 passes.
Do this test overnight, before going to bed.

---

Upload a screenshot of your hard disk using crystal disk info:

• CrystalDiskInfo - Software - Crystal Dew World
• Screenshots and Files - Upload and Post in Seven Forums

Make a hard drive test from the hard drive manufacturers website.

• Hard Drive Diagnostic Procedure

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• Disk Check

---

Run the System File Checker. It allows the user to scan for and restore corruptions in Windows system files.

• 1. Click on the
  2. Type CMD on Search
  3. Left click and Run as Administrator
  4. Type SFC /scannow

Full tutorial here:

• SFC /SCANNOW Command - System File Checker

---

Run Disk Check on your hard disk for file system errors and bad sectors on it:

• Disk Check

Let us know the results.