Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Bsod non-frequently (most common due to ntoskrnl.exe)

05 Dec 2012   #1

Windows 7 pro 64bit
Bsod non-frequently (most common due to ntoskrnl.exe)


i recently builded a new computer,
placed windows 8 on it, but constantly recieved errors..

so after that i installed windows 7 pro 64bit

i updated al my drivers ( i think)
i used several programs to check memory (memtest86+ etc)

and it still freezes (randomly, so not with a specific prog) or i get a bsod
(most common bsod is irsl not less or equal, i used to get a lot more but now almost all are like this one)

any help is welcome :)

(i attached sf zip)

My System SpecsSystem Spec
05 Dec 2012   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Hello jonasv.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
19 Dec 2012   #3

Windows 7 pro 64bit

sorry for late respons, couldn't get behind this pc :)

i did it again.. now with 5.dmp in the zip
My System SpecsSystem Spec

20 Dec 2012   #4

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

fffff800`00b9ca28  fffff880`0612fc0bUnable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
It is Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC. And it is kinda old.
lmvm rt64win7
start             end                 module name
fffff880`0612a000 fffff880`0619f000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Thu Apr 21 23:45:33 2011 (4DB07445)
    CheckSum:         00076017
    ImageSize:        00075000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek.

Lots of USB related issues there. For the port, first, uninstall and reinstall the USB ports drivers.
  1. Right click on Computer icon > manage. It will open the computer management window.
  2. Click on "Device Manager" in the left pane, it will list all installed devices up.
  3. Expand "USB Serial Bus Controllers" by clicking on the triangle in front of it.
  4. Click on one item to select, then right click and uninstall.
  5. Do the same for all.
  6. Restart the computer.
  7. At restart, windows will auto configure the appropriate drivers.
And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off

For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Scan the system for possible virus infection.
► Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

► Stress test the CPU.
Hardware - Stress Test With Prime95

** If you are using any USB dongle/ USB wifi .... let us know about it in detail. ..... State all the USB devices you use.
My System SpecsSystem Spec

 Bsod non-frequently (most common due to ntoskrnl.exe)

Thread Tools

Similar help and support threads
Thread Forum
Random BSOD (Ntoskrnl seems common denominator)
Hello all, Hopefully someone can help me with this issue. I have recently built my own new computer,and all is performing well and is exactly as i expected, apart for some random BSOD's. These are totally random, sometimes I can get 3 in a row, and others may not pop up for a week or two. I have...
BSOD Help and Support
BSOD while PC is idle most common ntoskrnl.exe
I have been a experiencing BSOD for over a month now. It seems to only happen when my PC is idle for >20 minutes. Taking a peak with BlueScreenView the problem seems to be with ntoskrnl.exe but I really do not know how to interrupt these results and come to a solution so I am reaching out to...
BSOD Help and Support
BSOD after approx 3 hours use. Then more frequently. ntoskrnl.exe
Specs: Processor: AMD Phenom II X6 1100T @ 3.30GHz RAM: 8GB GPU: Radeon HD 7870 Motherboard: GA 970A-DS3P Hard Drive: Kingston V300 60GB SSD I just built a new PC earlier this week and have been experiencing BSOD after about 3 hours of use every time I switch it on. I have run driver...
BSOD Help and Support
Varius BSOD with the only thing in common is the driver ntoskrnl.exe
Hi sevenforums, In the last 10 days i had 14 BSOD like MEMORY_MANAGEMENT 0x0000001a, SYSTEM_SERVICE_EXCEPTION 0x0000003b, DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1, UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f, PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 etc. And the only thing in common is that all of them...
BSOD Help and Support
Common BSOD or not!?
Hi everyone, am using Win7 for almost a month, so far I got 2 BSOD. the first one was about week after the installation, and I was able to fix the issue (Jraid fault). yest. I got another one, I tried to shutdown the machine and boom!!! BSOD. Here's the log: ...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:13.
Twitter Facebook Google+