New
#1
BSOD installing audio driver
My first post here. Hope I did it right. I've installed a new REVO3 X2 hard drive and I'm getting various blue screens. Here's the latest.
Thanks for any help.
My first post here. Hope I did it right. I've installed a new REVO3 X2 hard drive and I'm getting various blue screens. Here's the latest.
Thanks for any help.
Hello Bob, it is crashed by OCZ 10xx SCSI Controller Driver (likely for the Revo Drive 3 and 3 x2).
First try reinstalling the driver, and let us know, is it crashing again? Search for any available updates here: http://www.ocztechnology.com/drivers...voDrive_3_X2_/ . That one you are trying is dated April 6, 2012.Code:fffff880`0a3629e8 fffff880`0117296fUnable to load image \SystemRoot\system32\drivers\ocz10xx.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ocz10xx.sys *** ERROR: Module load completed but symbols could not be loaded for ocz10xx.sys ocz10xx+0x496f
The first thing I see is the correct sound driver is not installed. As you installed a new hard drive, although Windows 7 will install a lot of drivers, I would suggest installing all the ASUS supplied drivers, especially the motherboard chipset drivers and RealTek sound driver. The Windows installed HD Audio Codec is only a basic function sound driver.
I have a new system with a Gigabyte Z77 motherboard and even though Windows 7 installed some drivers, I found installing the Gigabyte supplied drivers fixed some problems, including sound.
One other issue, I notice this board has wi-fi. If you are not going to use that, disable it as wi-fi has known to cause some audio clicks and pops issues.
I appreciate the help, fireberd.
I have disabled the wi-fi, and I did install the chipset and audio drivers from the mobo disk, but they may have been "updated" by Windows or a driver update program I tried.
I'll go back and re-install from the disk only.
Thanks again for the suggestions.