Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant crash with page fault and memory controller errors

12 Dec 2012   #1
bronan

windows 7 x64 enterprise
 
 
Constant crash with page fault and memory controller errors

Hi guys

My new i7 system has been running not a day without a BSOD
Everytime i get crashes which contain message which make me think it is the memory

But after 3 new sets of 16 Gb memory i really am now clueless which part is messing up.
The big question is what is failing.
I even had that when i tried enter the bios the whole screen from bios was frozen.

At one monent i installed windows 8 rtm to see if the problem would appear in win 8 Which is now confirmed it does crash win 8 as well.
The question still remains what is causing the constant bsod's
I attached the needed SF file


My System SpecsSystem Spec
.
12 Dec 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello bronan.

The zip you uploaded does not contain any crash dump.
Dump Files - Configure Windows to Create on BSOD

Follow it manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump.

Post it after the next system crash, following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
12 Dec 2012   #3
bronan

windows 7 x64 enterprise
 
 

hmm i might have forgot it since i had a few more crashes
so hereby the missing minidump files

Been messing around with the memory sets
When i set the memory at its XMP profile speeds 1600/2000 Mhz the system crashes much faster and more often
when i set the system to defaults it obviouly boots into 1333 Mhz memory speeds
at the moment i tried to set them back to 1333 mhz i could not get into the system bios todo so
i had to remove the modules and put in the kingston modules to get the system boot
this far i can say running the memory at slow speed let me do some more before it crashes again
My System SpecsSystem Spec
.

13 Dec 2012   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Most of your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

And, as most of the stopcodes are 1A, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight, per RAM module per slot.

One is indicating to Intel(R) 82579V Gigabit Network Connection driver.
Code:
  fffff880`009f08c8  fffff880`065b72d4Unable to load image e1c62x64.sys, Win32 error 0n2
  *** WARNING: Unable to verify timestamp for e1c62x64.sys
  *** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
   e1c62x64+0x462d4
Try to update it from Intel Download Center.

Let us know the results.
My System SpecsSystem Spec
13 Dec 2012   #5
bronan

windows 7 x64 enterprise
 
 

thank you Arc indeed i updated the drivers and updated the bios also.

Now with help from a friends his very expenssive memory kingston KHX2133

The system runs till now without a error on 2 modules 2 x 4 Gb

I upped the speed on this memory set till 2000 Mhz and been running without any BSOD till now.

As soon as i put in one of the 4 x 4 Gb corsair modules sets my system starts messing up
If i just stay at 2 x 4 Gb all keep running smooth

I also tested all memory sets in his system and had as result that the 2000 Mhz set received from rma is also broken.
The corsair 1600 Mhz set runs smooth as babybottoms on his system even at the given 1600 Mhz however with much lower timings then the xmp profile says
It run at cl 11-12-11-30-39 while it should run at 9-9-9-25-33
but as soon as he set those timings even his system crashed

so looks like indeed a combination of bad memory and maybe also driver issues on intel
My System SpecsSystem Spec
13 Dec 2012   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

At first you resolve the memory issue .... the driver issue is not a big issue It is easy to replace one driver by another, but a good ram is to be purchased
My System SpecsSystem Spec
13 Dec 2012   #7
bronan

windows 7 x64 enterprise
 
 

Yes indeed i have to talk to the shop where i bought the memory and second have to wait how corsair responds on this
I am amazed that it turned out to be so hard to get memory working with the asus boards and especially that those advertised speeds are in many cases so damn hard to get them work at xmp profile speeds
these new boards often do not even use the xmp profiles or worse not even contain them anymore
Ofcourse i could be wrong to want faster memory but why release and sell memory speeds up to 2400 mhz, if its almost inpossible to get normal 1333 mhz working .....
On my older mainboards it was an issue but now its almost a crime to get it working, thats not what i call progress
My System SpecsSystem Spec
21 Dec 2012   #8
bronan

windows 7 x64 enterprise
 
 

Weird but true, not one of the memory vendors in my country does have memory in store above 2 x 4 Gb for this motherboard.
Also all memory selection programs only show either no ram or just that same corsair 1333 Mhz 2 x 4 Gb
While Asus makes alot of advertisements that this board can run 16/32 Gb, nobody can deliver me this far a set which actually runs without bsod
Brands like g.skill and geil do not have any memory configurators as far as i know, the QVL list from asus itself is a joke also.
Most of these numbers are impossible to get or seem not to exist at all.
On the other hand the driver verifier made the system crash at startup
So it might not be solved with the latest drivers i could find for my system
My System SpecsSystem Spec
22 Dec 2012   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Driver verifier identified Paragon Image Mounter (UIM) Plugin driver as the cause of the crash.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {e1, fffff98001530f9c, 0, 0}

*** WARNING: Unable to verify timestamp for uim_vimx64.sys
*** ERROR: Module load completed but symbols could not be loaded for uim_vimx64.sys
Probably caused by : uim_vimx64.sys ( uim_vimx64+1818e )

Followup: MachineOwner
---------
You may uninstall paragon.

Have you replaced the memory sticks? Or not?
My System SpecsSystem Spec
22 Dec 2012   #10
bronan

windows 7 x64 enterprise
 
 

The program paragon backup and recovery 2012 free removed from my system, going to try run in verifier mode again to see if i can run longer or without error.
The program was installed to make a backup of my current system so that i could recover in case of real disaster.

About the memory am trying to find a replacement set for the corsair memory untill now not succeeded

Current i have lend 8 Gb kingston 1600 Mhz ram from a friend who had them in reserve which runs at 1333 mhz have not tried running at other speed. The memory test (memtest86 ) ran flawless this far.
My System SpecsSystem Spec
Reply

 Constant crash with page fault and memory controller errors




Thread Tools




Similar help and support threads
Thread Forum
BSOD no crash log: page fault in nonpaged area
Typically I use WhoCrashed to diagnose my BSOD issues. However, this recent round of crashing has been elusive due to the lack of crash log. There isnít a dump file in system root folder or in the mini dump folder. Reading online Iíve made a few adjustments to see if somehow my crash dump was...
BSOD Help and Support
Random BSODS - sporadic. Often Page Fault errors
Hi I've been researching the root of my BSODs for what seems like forever and I feel like I'm banging my head against a brick wall. I'm running an overclocked system, and sporadically receive BSODs which are either pagefault errors or PFN corrupt errors. I've tried running the driver...
BSOD Help and Support
Numerous BSOD errors including Driver IRQL and page fault
Hi there I'm new to this forum. I recently bought a refurbished Asus N56-VM laptop and straight away had a BSOD. It got to the point where the whole system was incredibly slow so I then put a fresh install on a new drive and continue to suffer from different errors including Page Fault errors,...
BSOD Help and Support
Mem Management,Page fault BSODS + Memtest Errors
Hi everyone i was told to come here from tomshardware to have some help looking into my minidumps... heres a link to the thread to see what's been done; Link Heres the situation; Running a Homebuilt PC, with 8gb (2x 4gb) ram sticks; Crucial Ballistix sport 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3...
BSOD Help and Support
Constant BSOD if not in Safemode, Page fault in non paged area
I constantly bsod on reboot. Yesterday I took out my graphics card because i was selling it in an old computer. It was a ati 4770. I threw in an old xfx 8500 gt because my motherboard doesnt have an internal gfx. It ran for about an hour or so and then i started getting this BSOD. Not thinking I...
BSOD Help and Support
BSOD everytime, page fault and memory management mostly.
Hi guys, I've been having some BSOD's since forever and I can't open this dmp files so I wonder if any of you might help me. Thanks in advance, I attached the required files.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App