Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD: seems to be when copying files

12 Dec 2012   #1

Windows 7 Home Premium 64bit
BSOD: seems to be when copying files


For about half a year, every now and then I get the BSOD:

Technical Information:

STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8800453C9F2,...........)

asmtxhci.sys - Address FFFFF8800453C9F2 base at FFFFF88004518000.........

This BSOD seems to happen when lots of files are transferred from the computer to a hard drive, and recently happened when I plugged in my iphone to itunes.

Is this a serious problem?

I would greatly appreciate any help!
My System SpecsSystem Spec
13 Dec 2012   #2

Windows 8 Professional x64

Please update your ASMEDIA XHCI Host Controller Driver.

That should solve your problem. You can search for this driver in the manufacturers driver disc.

*** WARNING: Unable to verify timestamp for asmtxhci.sys
*** ERROR: Module load completed but symbols could not be loaded for asmtxhci.sys
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff8800453c9f2, fffff8800302d918, fffff8800302d170}

Probably caused by : asmtxhci.sys ( asmtxhci+249f2 )

Followup: MachineOwner

1: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff8800453c9f2, The address that the exception occurred at
Arg3: fffff8800302d918, Exception Record Address
Arg4: fffff8800302d170, Context Record Address

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff880`0453c9f2 4d8b4318        mov     r8,qword ptr [r11+18h]

EXCEPTION_RECORD:  fffff8800302d918 -- (.exr 0xfffff8800302d918)
ExceptionAddress: fffff8800453c9f2 (asmtxhci+0x00000000000249f2)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 0000000000000018
Attempt to read from address 0000000000000018

CONTEXT:  fffff8800302d170 -- (.cxr 0xfffff8800302d170)
rax=fffff8800456fe60 rbx=00000000000000a0 rcx=fffffa800c8d1010
rdx=0000000000000000 rsi=0000000000000001 rdi=fffffa80093ae9c8
rip=fffff8800453c9f2 rsp=fffff8800302db50 rbp=0000000000000080
 r8=fffffa80093ae9c8  r9=fffffa800c8d1010 r10=00000000000000d8
r11=0000000000000000 r12=fffffa8009296058 r13=fffff88004561af0
r14=0000000000000000 r15=fffff80000b96080
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
fffff880`0453c9f2 4d8b4318        mov     r8,qword ptr [r11+18h] ds:002b:00000000`00000018=????????????????
Resetting default scope




ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  0000000000000018

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000330a100
GetUlongFromAddress: unable to read from fffff8000330a1c0
 0000000000000018 Nonpaged pool

fffff880`0453c9f2 4d8b4318        mov     r8,qword ptr [r11+18h]



LAST_CONTROL_TRANSFER:  from fffffa80092962b8 to fffff8800453c9f2

fffff880`0302db50 fffffa80`092962b8 : fffff880`04564603 00000000`00000000 00000000`00000000 fffffa80`093ae9c8 : asmtxhci+0x249f2
fffff880`0302db58 fffff880`04564603 : 00000000`00000000 00000000`00000000 fffffa80`093ae9c8 fffff880`0454894c : 0xfffffa80`092962b8
fffff880`0302db60 00000000`00000000 : 00000000`00000000 fffffa80`093ae9c8 fffff880`0454894c fffffa80`0c8d1010 : asmtxhci+0x4c603


SYMBOL_NAME:  asmtxhci+249f2

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: asmtxhci

IMAGE_NAME:  asmtxhci.sys


STACK_COMMAND:  .cxr 0xfffff8800302d170 ; kb

FAILURE_BUCKET_ID:  X64_0x7E_asmtxhci+249f2

BUCKET_ID:  X64_0x7E_asmtxhci+249f2

Followup: MachineOwner
My System SpecsSystem Spec

Thread Tools

Similar help and support threads
Thread Forum
BSOD problem - copying many files
I've been living with this bsod for some months now... soon after building my pc. At first I thought it was a spontaneous reboot until I discovered how to stop the system from rebooting on bsod. I discovered that I could repro the problem by copying huge amounts of files from one drive to another...
BSOD Help and Support
BSOD When Copying Files to External HDD
It started after I purchased an external USB3 HDD. All my previous HDDs were USB 2.0. The moment I plugged it into the USB3 socket for the first time, the computer blue screened. I followed Windows 7's Action Centre advice to install the suggested newer AsMedia USB3 driver, and it seems to have...
BSOD Help and Support
BSOD copying bulk files from ext. HDD
Hi all, I have a 1TB external HDD attached to my laptop. Whenever I attempt to copy multiple files to another HDD I am confronted with a BSOD. Can anyone read the dumpfile and see what my issue is, please? Thanks, Ed
BSOD Help and Support
BSOD when copying large files
Hi all, I get the Kernel Bule Screen of Death when trying to copy or play files over 1GB; lastest three dmp files are below in text file format. Started on the 14th Jan 2012 and has happened 50 times. The System is not overclocked. Please Help OS Windows 7 Pro x64 SP1 CPU...
BSOD Help and Support
BSOD when copying large files...
Rebuilt my whole system due to an unusual BSOD issue. Now I'm getting a new one. When I copy games from a disc or large file from one HDD to another HDD it'll BSOD. I have no idea what's going on. Windows 7 Pro 64 bit. Thanks in advanced, Richard
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:33.
Twitter Facebook