Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD on after logging in, error 0x0a

12 Dec 2012   #1

windows 7 home premium 64bit
BSOD on after logging in, error 0x0a

Built this pc for a friend and while it doesnt happen everytime fairly often it gets a BSOD after logging into a profile. I have updated all drivers and switched anti-virus programs but it still happens.

uploaded latest dump files.

My System SpecsSystem Spec
12 Dec 2012   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Welcome to SevenForums.

Perform a clean boot:
*Does the computer BSOD in Safe Mode?

Uninstall Avira antivirus:
Make scans with the following:

-Kaspersky TDSSKiller
-ESET online scannerMSE is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software:-
1. Microsoft Security Essentials - Free Antivirus for Windows
2. Malwarebytes - Free
3. Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.
My System SpecsSystem Spec
19 Dec 2012   #3

windows 7 home premium 64bit

I removed avira but it happened again, this time it happened randomly while using the PC. It has not happened the few times I've started it in safe mode but it also does not happen every time i use the PC.

I have uploaded the latest dump files to see if you see the cause but will run the clean boot for the next week or 2 till i hopefully narrow it down. The tricky thing is its not everytime i use the PC that i blue screen so even running clean boots means i need to remove services for a long period of use.
My System SpecsSystem Spec

19 Dec 2012   #4

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

From your files it looks like avira is still there.
Have you installed MSE and Malwarebytes?
Made full scans with both? ESET & TDSS?

Reinstall this program & its drivers:
cFosSpeed - The Internet Accelerator
(Latest if available)

Update these drivers:
lmvm netr28x
start             end                 module name
fffff880`044d1000 fffff880`04587000   netr28x  T (no symbols)           
    Loaded symbol image file: netr28x.sys
    Image path: \SystemRoot\system32\DRIVERS\netr28x.sys
    Image name: netr28x.sys
    Timestamp:        Fri Jun 19 13:56:06 2009 (4A3B4496)
    CheckSum:         000B67F9
    ImageSize:        000B6000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)

Perform a System File Check:
  • Click on the
  • Type CMD on Search
  • Left click and Run as Administrator
  • Type SFC /scannow
Full tutorial here:

Disk Check on your hard disk for file system errors and bad sectors on it:

If the above does not bring stability, test your RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.

Post your results.
My System SpecsSystem Spec
13 Jan 2013   #5

windows 7 home premium 64bit

Alright sorry for the late reply but it looks like it was a faulty RAM stick. Had 4 2 GB sticks and once I narrowed down and removed the faulty stick the computer has not blue screened for a about 1 1/2 weeks now.

Thanks for the help! Hope i don't need to come back =P
My System SpecsSystem Spec
14 Jan 2013   #6

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

When you're confident your problem is solved please mark the thread as solved.

Tip   Tip
  • If your problem is solved please use the Mark this thread as solved link at the top of your thread or down on the left corner
My System SpecsSystem Spec
30 Jan 2013   #7

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Any update?
My System SpecsSystem Spec

 BSOD on after logging in, error 0x0a

Thread Tools

Similar help and support threads
Thread Forum
BSOD or 100% CPU usage with normal PC use, error 0X0a
I recently replaced my original desktop hard drive about a month ago. Things have been working great for the first few weeks, but this last week I started to get a combination of two things: BSOD and 100% CPU usage which would cause me to have to restart my desktop in order to get it working...
BSOD Help and Support
BSOD 0x0a sometimes while logging in other while working on vegas
hello guys i ran the verifier and removed daemon as a direct result from that. it got quiet for a while and then it started again. the bosd on ntoskrnl.exe doesnt seems memory related (ran memtest with two passes, no errors) also ran chkdsk /r on both system and data drives. the sfc scan...
BSOD Help and Support
BSOD whilst idling. Error 0x0a
I have recently over the last few days been coming back to my computer after using it, to find it has restarted. I have turned off the Auto Restart and got a BSOD report. driver_irql_not_less_or_equal Attached here: Can't seem to work out what I should be looking for in the reports so...
BSOD Help and Support
BSOD playing LOL , error 0x0A
So , ahm , i've a bsod when i go play LOL It's 0x0a irql_not_less_or_equal So, anyone help me plz, :D Sometimes , i've 0x3b , 0x7e, idk , help me, i want to play LOL Xd
BSOD Help and Support
BSOD just while logging in, error 50(?)
Hello. I don't usually receive this error, but I want to make sure it isn't a large problem. That is why I'm trying to repair it anyways.. Here is the crash information: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1033
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:11.
Twitter Facebook Google+