BSOD "MEMORY_MANAGER" while stressing my system.


  1. Posts : 1
    windows 7 ultimate x64
       #1

    BSOD "MEMORY_MANAGER" while stressing my system.


    this is a new problem. i have not added any new hardware in at least 6 months. this happens when i am using programs like:
    MAYA 2013, CS5.5, MATCHMOVER 2013.

    these programs will use quite a bit of ram, and hit the video card and cpu pretty hard.

    please help me discover which thing is going kablooie.

    thanks for your help!
    matt
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Welcome

    Uninstall Norton:

    Replace with MSE:

    Microsoft Security Essentials.
    Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
    Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

    Run a full scan with both (separately) once downloaded, installed and updated.


    Perform a System File Check:
    • Click on the
    • Type CMD on Search
    • Left click and Run as Administrator
    • Type SFC /scannow

    Full tutorial here:



    Upload a screenshot of your hard disk using CrystalDiskInfo:

    Make a hard drive test from the hard drive manufacturers website:

    Run Disk Check on your hard disk for file system errors and bad sectors on it:



    Reduce items at start-up. Nothing except anti-virus is required:



    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Do this test overnight, before going to bed.

    Post back results
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:15.
Find Us