Boot Manager Error (Not sure if this is technically a BSOD)

Page 5 of 6 FirstFirst ... 3456 LastLast

  1. Posts : 47
    Windows 7
    Thread Starter
       #41

    gregrocker said:
    Work through these Troubleshooting Steps for Windows 7 to check it out, gather clues and learn more about your PC and the way to troubleshoot it.
    Newest problem after running HD Diagnostic and MEMTEST. Has happened twice while idling for 10 hours.
    Start menu becomes empty, programs will not open, skype gives me an I/O error. That I/O error code is the same one as my Boot Manager error on the first page.
      My Computer

  2.    #42

    What were the results of the HD Diagnostics extended CD scan and Disk Check? Sounds like a HD problem.
      My Computer


  3. Posts : 47
    Windows 7
    Thread Starter
       #43

    gregrocker said:
    What were the results of the HD Diagnostics extended CD scan and Disk Check? Sounds like a HD problem.
    HD Diagnostics Long Test said PASSED. I will do a Disk Check too.
      My Computer

  4.    #44

    Test the RAM - Test with Memtest86+ for 5-6 passes or overnight to stress test it.
      My Computer


  5. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #45

    Hello Borna.

    Uninstall Super AntiSpyware. A storport.sys error may either cause by a faulty disc (I guessed you have checked the SSD for error, and it is passed, as you reported); or by any disc emulator (no SPTD.sys is present there, so we can ignore this part too) or by virus/rootkit (you scanned earlier and came clean) or by a AV program which uses a filter manager, and affecting the system's filter manager adversely. During Scanning with Super, the BSOD with storport.sys indicates that it is the program that is causing the issue. Anyway, a spyware is not very easily available. So you may easily remove it.

    After removing it, scan the system for possible virus infection, again.


    BTW, have you taken ownership of your files? And, are you sure that you have installed the latest realtek network drivers?


    If possible, free up some space in the SSD, too.
    Last edited by Arc; 28 Dec 2012 at 15:29.
      My Computer


  6. Posts : 47
    Windows 7
    Thread Starter
       #46

    Arc said:
    Hello Borna.

    Uninstall Super AntiSpyware. A storport.sys error may either cause by a faulty disc (I guessed you have checked the SSD for error, and it is passed, as you reported); or my any disc emulator (no SPTD.sys is present there, so we can ignore this part too) or by virus/rootkit (you scanned earlier and came clean) or by a AV program which uses a filter manager, and affecting the system's filter manager adversely. During Scanning with Super, the BSOD with storport.sys indicates that it is the program that is causing the issue. Anyway, a spyware is not very easily available. So you may easily remove it.

    After removing it, scan the system for possible virus infection, again.


    BTW, have you taken ownership of your files? And, are you sure that you have installed the latest realtek network drivers?


    If possible, free up some space in the SSD, too.
    How do you take ownership of your files?
    Yes, my realtek netwrok driver is completely up to date, I made sure of it through the realtek website.
    I have removed it and I'm going to do what you suggested now.
    Would this also be the problem for my I/O error that I've been getting since I got this computer though?
      My Computer


  7. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #47

    Do the memtest that Greg suggested.

    Whendone, if RAM shows any error, RMA those. If it come clean, configure minidump, so that we may get some detailed info about the I/O violation.

    First configure minidump. Follow it: Dump Files - Configure Windows to Create on BSOD
    Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

    Search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

    Then enable Driver Verifier.
    Driver Verifier - Enable and Disable
    Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

       Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

       Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

       Tip



    During DV enabled, use the system normally as usual. Specially the crash prone actions. Say scan with MBAM. Let us know the results, with the subsequent crash dumps, if any.

    Can you access the start menu All Programs list, and can open programs?
      My Computer


  8. Posts : 47
    Windows 7
    Thread Starter
       #48

    Arc said:
    Do the memtest that Greg suggested.

    Whendone, if RAM shows any error, RMA those. If it come clean, configure minidump, so that we may get some detailed info about the I/O violation.

    First configure minidump. Follow it: Dump Files - Configure Windows to Create on BSOD
    Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

    Search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

    Then enable Driver Verifier.
    Driver Verifier - Enable and Disable
    Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

       Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

       Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

       Tip



    During DV enabled, use the system normally as usual. Specially the crash prone actions. Say scan with MBAM. Let us know the results, with the subsequent crash dumps, if any.

    Can you access the start menu All Programs list, and can open programs?
    memtests passed, DV enabled, Avast + MBAM scanned and cleaned, approaching 3 hours with no BSOD yet. I opened up DV and clicked on Existing Settings to make sure it is enabled, and it is. Programs are opening, Start Menu is working fine. I will let you know when it does crash. It's lasted a surprisingly long time with DV active, I usually get BSOD instantly.
      My Computer


  9. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #49

    OK.... disable DV now. and, use the computer normally.

    Reoprt us the situation, either after a reasonable time that you think reasonable, or when you face the next issue, which one is earlier. :)
      My Computer


  10. Posts : 47
    Windows 7
    Thread Starter
       #50

    First BSOD in 4 days. No dump file created for it. Error was KERNAL_DATA_INPAGE_ERROR. Stop code 0x0000007A.
      My Computer


 
Page 5 of 6 FirstFirst ... 3456 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:22.
Find Us