New
#21
It depends upon how much data is stored on your hard-drive, and it will be slower, if you are running other applications while MSE is scanning. Has it completed yet?
It depends upon how much data is stored on your hard-drive, and it will be slower, if you are running other applications while MSE is scanning. Has it completed yet?
The scan completed and the computer is clean. It is done sometime after 7 hours I think. I let it rest for around an hour and turned it on to check my mails and stuffs and bsod occurred within less than an hour of use.
That's good to know, and it's best to run the test on the graphics card, and then start removing hardware one at a time which uses your PCI/PCIe slots.
For example, say your Sound Card was suspected of causing the BSOD, then remove the Sound Card and then see if a BSOD occurs.
I am just ran the GPU: OCCT test for 1 hour and around only 30 seconds into the test, the bsod occurred again. Does this confirm it as a graphics card problem?
Upload the BSOD and the screenshots of the test.
I will upload the BSOD as soon as the machine can start. However how can I get the screenshots of the test? The bsod occurs within 30second into the test.
Here is the new BSOD.
They should be saved within this directory:
Here's the same crash:Code:C:\Users\[user Name\Documents\OCCT\[Date]
Code:BugCheck 124, {4, fffffa8004ac28d8, 0, 0} Probably caused by : GenuineIntelRemove the graphics card, do have a onboard graphics card or another graphics card to use for the computer?Code:=============================================================================== Section 0 : PCI Express ------------------------------------------------------------------------------- Descriptor @ fffffa8004ac2958 Section @ fffffa8004ac29e8 Offset : 272 Length : 208 Flags : 0x00000001 Primary Severity : Recoverable Port Type : Root Port Version : 1.1 Command/Status: 0x4010/0x0507 Device Id : VenId:DevId : 8086:340e Class code : 030400 Function No : 0x00 Device No : 0x07 Segment : 0x0000 Primary Bus : 0x00 Second. Bus : 0x00 Slot : 0x0000 Dev. Serial # : 0000000000000000 Express Capability Information @ fffffa8004ac2a1c Device Caps : 00008021 Role-Based Error Reporting: 1 Device Ctl : 0107 ur FE NF CE Dev Status : 000b UR fe NF CE Root Ctl : 0008 fs nfs cs AER Information @ fffffa8004ac2a58 Uncorrectable Error Status : 00104020 UR ecrc mtlp rof uc ca CTO fcp ptlp SD dlp und Uncorrectable Error Mask : 00000000 ur ecrc mtlp rof uc ca cto fcp ptlp sd dlp und Uncorrectable Error Severity : 00062010 ur ecrc MTLP ROF uc ca cto FCP ptlp sd DLP und Correctable Error Status : 00002000 ADV rtto rnro dllp tlp re Correctable Error Mask : 00000000 adv rtto rnro dllp tlp re Caps & Control : 00000005 ecrcchken ecrcchkcap ecrcgenen ecrcgencap FEP Header Log : 00000000 00000000 00000000 00000000 Root Error Command : 00000000 fen nfen cen Root Error Status : 00000000 MSG# 00 fer nfer fuf mur ur mcr cer Correctable Error Source ID : 00,00,00 Correctable Error Source ID : 00,00,00 ===============================================================================
I just removed the graphics card and i dont see anymore VGA or HDMI slots. I dont have any extra graphics card either
The OCCT test did not give me any result. I searched the directory u mentioned and the OCCT folder both has no report.
Do you have friend or know anyone who will be able to lend you a graphics card to use? The screen won't show anything without the graphics card inserted (do seem to not have a onboard graphics chip either), so reinsert the card at the moment and then remove another device which is using a PCI/PCIe slot.