Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Page Fault In Nonpaged Area

27 Dec 2012   #1
Kurama

Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
 
 
Page Fault In Nonpaged Area

After more than 100 PFN_LIST_CORRUPT and one Memory Management BSOD, I get this now: Page Fault In Nonpaged Area

What is the cause of this? Here is my dump file


My System SpecsSystem Spec
.
27 Dec 2012   #2
Pauly

Win7 Ultimate X64
 
 

There is only one dump file in your upload and that indicates 0x50 error which points at a memory issue (although could be caused by something else)
BSOD Index
first step would be to run a check on your RAM, i would advise to download and burn memtest and to run in overnight for multiple passes and see what the outcome is
RAM - Test with Memtest86+
My System SpecsSystem Spec
27 Dec 2012   #3
Kurama

Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
 
 

Well, I thought that and ran it but didn't show any errors for 7-8 runs. Maybe it can't detect because there are 2 modules??
My System SpecsSystem Spec
.

28 Dec 2012   #4
Pauly

Win7 Ultimate X64
 
 

Have you got any more dumps, upload a few more recent ones if you have them
My System SpecsSystem Spec
28 Dec 2012   #5
Kurama

Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
 
 

No. I always get PFN_LIST_CORRUPT and nothing solved it. I could upload more dumps if I get more BSoDs
My System SpecsSystem Spec
28 Dec 2012   #6
Kurama

Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
 
 

I got PFN_LIST_CORRUPT BSoD while I was outside and computer was idle (Google Chrome vs were working)
My System SpecsSystem Spec
28 Dec 2012   #7
Pauly

Win7 Ultimate X64
 
 

OK this dump lists the error as 0x4e BSOD Index so is likely we are looking at a faulty or non compatible driver, will do some digging and post back later
My System SpecsSystem Spec
28 Dec 2012   #8
Pauly

Win7 Ultimate X64
 
 

OK had a better look i cant see any really old drivers on your system however there is a mention of avp.exe which is an element of your anti virus (kaspersky) if so remove it and install MS security essentials as it has good known compatibility with W7

Also if you have done any overclocking stop and return bios to standard settings for the purposes of testing until you get a stable system

If you get any more dumps please post them all
My System SpecsSystem Spec
28 Dec 2012   #9
Kurama

Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1
 
 

Well, before that, I used ESET but it isn't about it. As I recall, Security Essentials didn't stop it either. I really can't remember.

So what? BSoDs because of antivirus&firewall you say?
My System SpecsSystem Spec
28 Dec 2012   #10
Pauly

Win7 Ultimate X64
 
 

No not definately because of it but can cause problems and be a contributing factor (it was listed in your dump file), i would remove all AV and firewalls and just run with MSE and windows built in firewall until you get up and running again
My System SpecsSystem Spec
Reply

 Page Fault In Nonpaged Area




Thread Tools




Similar help and support threads
Thread Forum
page fault in nonpaged area
BSOD after i log into windows im not sure whats causing it i know its not one of my parts cause all of it is fairly new and its been running fine for a few months. Im going to upload the bare dmp file cause i cant use DM log while im in safe mode and these are my computer specs. Windows 7 Home...
BSOD Help and Support
Page fault in nonpaged area
Hi thank you for your attention, I know there are threads out there about this problem already and i just wanted to cut through the basics. I am not that computer literate so plz be patient with me. My Specs... AMD Phenom IIx6 1090T Black ASUS M4A78T-E 4GB 2x2 DDR3 G-Skills Ripjaws...
BSOD Help and Support
Page Fault in NonPaged Area
Dear all, I've bought a new system (it's an Intel I7 with 16GB RAM) and I've just installed Windows 7 64bits Professional Edition. I'm trying to copy a large amount of data (180GB aprox) from another PC by using a external USB disc and the machine keeps panicing with the page fault in...
BSOD Help and Support
Page Fault in NonPaged Area
I received a Stop error when I was actually doing nothing. Just happened. I have attached the dump. I restored to a couple of days ago, and Windows had to repair my Start items. I am back up, but I don't know what happened and how I can stop it from happening again. Any insights would be...
BSOD Help and Support
page fault in nonpaged area
I received this error the first time I restarted the computer after installing The Sims 3, it does this shortly after the "Starting Windows" screen, i cannont load windows at all i have tried Safe Mode but against to no avail, i cannont access the minidump files for some reason, i have tried...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:41.
Twitter Facebook Google+