Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Critical Object Termination, Error 0XF4

03 Jan 2013   #11

Windows 7 Ultimate x64

hi, did you got your answer here?
can you share what have you experienced next here for us

My System SpecsSystem Spec
05 Jan 2013   #12

Windows 7 Home x64

Hi mmkarimi,

I was spending a lot of time trying to figure it out and finally just decided to RMA it back to Asus to have them figure it out. In about 3 weeks it'll be 2 years since I purchased an Asus laptop and I have yet to actually get to use it. I may be jaded against them now but I figure I'll let them spend the resources to figure it out instead of spending days doing it myself. I did however help them out and sent them a note on what causes the crash (thanks to you). I'll post an update to let you know what happens when I get the laptop back.

My System SpecsSystem Spec
05 Jan 2013   #13

Windows 7 Ultimate x64

hope that they change some hardware for you with a new ones, as i told before, i had such experience before, but the good point is they just change the devices with a new one,
for me it took about more than two weeks to get it ready, hope it take much less for you

My System SpecsSystem Spec

17 Jan 2013   #14

Windows 7 Home x64

Well, I just got the laptop back. They marked it as repaired and checked off "replaced system board," "replaced hard disk drive," and "replaced power cable." I don't know what this last one is since I didn't send them my power chord... maybe they're talking about some cable in the laptop. Frankly, I call BS on this because almost every single one of my RMAs (10 to date) has had the system board replaced. Right...

Anyways, they also removed my OCZ Vertex2 SSD drive (OS drive) left it out of the laptop. Instead, they installed Windows 7 on what I was using as my storage drive (750 GB SATA). Generally the G74S comes with two 750 GB SATA drives, but I had one of mine upgraded to the SSD drive from XoticPC, which is where I originally purchased it.

They put a ton of bloatware on their installations so it runs extremely slow, however, there is no crash upon the return from Sleep Mode.

Since they removed the OCZ drive, I just put it back, made it the primary boot disk, updated the firmware on it, did whatever updates I could and tried the sleep mode again. It crashed. Looks like the OCZ drive is not compatible with the laptop. That's strange... I didn't realize an HD could be incompatible with a computer.
My System SpecsSystem Spec
17 Jan 2013   #15

Microsoft Community Contributor Award Recipient

Windows 7 enterprise 64 bit, Windows 7 Pro 64 bit ,Windows 8 64bit

Unfortunately Hojoko the problem with OCZ is that they are incredibly fast but highly unstable from what I have seen here on the forums. Nine times out of ten if a personhas an OCZ drive and they are getting BSODs that involve some sort of hard drive error it is being cause by the OCZ SSD. Like I said great speed but the trade off is terrible stability.
My System SpecsSystem Spec

 BSOD Critical Object Termination, Error 0XF4

Thread Tools

Similar help and support threads
Thread Forum
BSOD Critical Object Termination
For the past few days I've been getting BSODs around 3-4 times a day periodically. At times it would happen back to back or after a few hours at a time. I've included the attachments as instructed. I'm stumped at what I can do and have little to no experience with this kind of thing.
BSOD Help and Support
BSOD Critical Object Termination F4
I tried using the SF diag tool and it kept giving me errors. I ran as administrator, changed the compatability mode and disabled symantec. Any advice on the dumps that i attached in the zip would be helpful. Its a Dell E6400, with a new M4 SSD (256 gb). Win 7 Pro SP1, 2.4ghz Core2 Duo, 2X2gb...
BSOD Help and Support
BSOD critical object termination
I don't know what had happened to my computer but it just had BSOD suddenly 021312-15085-01.dmp here is the dmp file and i wish someone can help me with this, im about to explode ps: i just installed drop box 30min ago before the bsod happened during restart
BSOD Help and Support
bsod ie8&aol 9.6 critical object termination f4 ntoskrnl.exe+80640
Hi, I hope you can help-this is driving me crazy. Before I did a system restore to a known good working restore point I was getting a lot of 'not responding' issues and bsods with apparently different causes as per nirsoft's bsod viewer. Since the restore it's crashed and rebooted five times,...
BSOD Help and Support
BSOD F4 Critical Object Termination
Need help solving this problem. Machine occasionally crashes w BSOD at start of day. After reboot (sometimes needing to boot in "safe" mode) machine works fine the rest of day. Can't seem to find a pattern. I have uploaded the perfmon and BSOD Files Gateway SX 2850 Windows 7 Home Premium...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.
Twitter Facebook Google+