Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Kmode_exception_not_handled

11 Jan 2013   #21

Windows 7 home premium 64bit

update: I reinstalled nvidia drivers once again but this time with "clean install". I noticed that the bluescreen involved nvidia drivers so this could help?

Just waiting for another bluescreen to surprise me...

My System SpecsSystem Spec
12 Jan 2013   #22

Windows 7 home premium 64bit

GPU drivers did not do help. I got this bluescreen now. Could the root problem be the MoBo?
My System SpecsSystem Spec
12 Jan 2013   #23
x BlueRobot


BugCheck 7F, {8, 80050031, 6f8, fffff88004a8d752}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+1d6752 )
Usual causes:  Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

3: kd> lmvm nvlddmkm
start             end                 module name
fffff880`048b7000 fffff880`05355000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sat Dec 29 06:47:52 2012 (50DE9218)
    CheckSum:         00A7F96C
    ImageSize:        00A9E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
The latest driver which has been released, is dated as the 5th January 2013:
  1. Download Driver
  2. Start Type: Device Manager
  3. Expand Display Adapters
  4. Right-Click Driver Name, Uninstall
  5. Reboot
  6. Run Driver Sweeper
  7. Reboot
  8. Install Downloaded Driver
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:Scan for any missing, modified or corrupted protected Windows files with:Could you please upload the OCCT graphs and did the BSOD occur with new RAM modules?
My System SpecsSystem Spec

12 Jan 2013   #24

Windows 7 home premium 64bit

Scan with SFC /scannow command has been done and it said that no violations found.

I uninstalled NVIDIA drivers, rebooted, ran driver sweeper, rebooted, installed 310.90 NVIDIA drivers and rebooted. Now i ran OCCT GPU test for 10minutes and zipped graphs into attachement, the FPS drops at the begining was because i move the graphics window a few times.

I installed the new RAM back to my motherboard because it seems that it doesnt matter which ram i use. Anyways I'm preparing for next bluescreen again, although no indicators for that happening is present...
My System SpecsSystem Spec
13 Jan 2013   #25
x BlueRobot


You need to run OCCT for least 1 hour, in order to gather a reliable judgment about the voltages and temperatures, to deal with any overheating issues you can remove any dust from inside the case and remove the side cover to provide better air circulation. Please ensure you have enabled the Error Checking ability in OCCT.

Any possible BIOS updates? It will best to check the motherboards website or your computer manufacturer:

[BIOS Information (Type 0) - Length 24 - Handle 0000h]
  Vendor                        American Megatrends Inc.
  BIOS Version                  2105   
  BIOS Starting Address Segment f000
  BIOS Release Date             07/23/2010
My System SpecsSystem Spec
13 Jan 2013   #26

Windows 7 home premium 64bit

As i said earlier, that is the latest bios update. I've dusted my pc already. But good news, my computer has been stable for entire day as of now. By the way if i enable error checking in OCCT, the graphics window just freezes and does nothing.
My System SpecsSystem Spec
14 Jan 2013   #27

Windows 7 home premium 64bit

2 days stable now :) I trust the blue screen issue is fixed now.

Thank you blue robot you are awesome. I believe that the number of different bluescreens were because of mixed GPU drivers. Although the problems begun when i installed the new memory sticks but maybe i also updated nvidia drivers that same day which caused the problems, i don't remember. Anyways it was most likely a driver issue and i hope the system won't crash tomorrow :)

Thanks for help!
My System SpecsSystem Spec
14 Jan 2013   #28
x BlueRobot


Your welcome, and hopefully no more crashes will occur :)
My System SpecsSystem Spec
16 Jan 2013   #29

Windows 7 home premium 64bit

bad news, i got blue screen after 4 stable days. I wonder if this is related crash. Linking the crash dump

edit: I'm running DriverEasy software and updating every driver i can get my hands on
My System SpecsSystem Spec
16 Jan 2013   #30
x BlueRobot


The dump file seems to be corrupted for some reason, try recreating your page file if you haven't done so, by following these steps:

Delete/Recreate the Pagefile
  1. Go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
  2. Click on the Advanced tab
  3. Click on the Performance Settings button
  4. Click on the Advanced tab
  5. Click on the Virtual Memory Change button
  6. Uncheck the "Automatically manage paging file size for all drives" box (it's the default)
  7. If the above box isn't checked, then make a note of what the paging file settings are
  8. Click on the "No paging file" radio button, then click on "Set"
  9. Answer Yes to the confirmation dialog that pops up.
  10. Click on OK 3 times (to close all the Windows)
  11. Reboot the system (this will delete the paging file)
  12. Once Windows starts, go to Start and type in "sysdm.cpl" (without the quotes) and press Enter
  13. Click on the Advanced tab
  14. Click on the Performance Settings button
  15. Click on the Advanced tab
  16. Click on the Virtual Memory Change button
  17. Place a checkmark in the "Automatically manage paging file size for all drives" box (it's the default)
  18. If the above box wasn't checked at first, then re-enter the paging file settings that you noted in Step 7
  19. Click on "Set" (it'll be greyed out if you checked the box 2 steps earlier
  20. Click on OK 3 times (to close all the Windows)
  21. Reboot the system (this will recreate the paging file
Have you ran Memtest86+ for least 9-10 passes yet?

I also wouldn't recommend using DriverEasy for updating drivers, since many third-party driver programs aren't very reliable at updating drivers; it's best to download the driver file from the manufacturer and then install through Windows Device Manager instead.

KdDebuggerDataBlock is not present or unreadable.
My System SpecsSystem Spec


Thread Tools

Similar help and support threads
Thread Forum
On Fri 4/29/2016 2:21:05 AM GMT your computer crashed crash dump file: C:\Windows\Minidump\042816-20202-01.dmp uptime: 20:08:44 This was probably caused by the following module: ntoskrnl.exe (nt+0x73C10) Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0) Error: KMODE_EXCEPTION_NOT_HANDLED file...
BSOD Help and Support
Hi i recently built a new PC and randomly it blue screens, mostly on start ups, my PC is asus 97-p i3 4150 msi gtx 770 8gb crucial ram I have followed instructions and attached my dmp file. Someone please help me i feel like breaking this machine Thanks Mark
BSOD Help and Support
In the last three days, I have gotten these two BSODs. Logs are attached. Jim
BSOD Help and Support
How do I solv this problem windows version: Windows 7 , 6.1, build: 7600 windows dir: C:\Windows Hardware: INTEL_, Intel Corporation, DQ965GF CPU: GenuineIntel Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz Intel586, level: 6 2 logical processors, active mask: 3 RAM: 4225486848 total VM:...
BSOD Help and Support
Hello everyone, I am getting this BSOD on a new install/build and need help solving. Everything installs fine and the PC will run for perfectly for a couple of days then I get this BSOD KMODE_EXCEPTION_NOT_HANDLED (1e). Sometimes the system will boot right back up and work for a few...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:20.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App