BSOD, computer will not power on immediately afterward

I've been having issues with my computer refusing to power on for about five minutes after a crash. If I hit the power button immediately after the shutdown, nothing happens, as if there's no power to it. But if I wait about five minutes, it will power on and load Windows up just fine.

I'm pretty sure it's a hardware issue, but I'd like to eliminate the possibility of a software issue and see what the BSOD message says before I go messing with the hardware. I've attached the SF Diagnostic zip file from the latest crash.

Thanks in advance!

Code:

BugCheck 24, {1904fb, fffff88009d4f8c8, fffff88009d4f120, fffff880012f25e0}

Probably caused by : Ntfs.sys ( Ntfs!NtfsFindPrefixHashEntry+227 )

Code:

Usual causes:  Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• Screenshots and Files - Upload and Post in Seven Forums

Make sure you have the latest firmware for SSD, and ensure all the SATA and Power cables are connected to the drive.

Check for any file system errors and bad sectors using Option #2 of:

• Disk Check

Use this command with Disk Check:

Code:

chkdsk C: /f /r

Thanks for the suggestions, and for helping me eliminate software problems as the culprit. It did turn out to be a hardware problem; my PSU was failing.

That's good to know, thanks for the update, and glad your system is now stable again.